Best Fishing Kayak Accessories Kit

Accessories 6 Feb 2023 10+ Comments Open

1. Booms Fishing Trolley Mounting Accessories

Booms Fishing Trolley Mounting Accessories

Purchase is risk-free. A 120-day money back guarantee and a 3-year warranty are offered by them. Buy with confidence. The kayak pad eye tri-grip rivet kit is perfect for tie-down and deck loop use. Black pad eyes are made from injected molede plastic and have high attachment points for seats, leashes, and other items. For mounting hardwares where you don't have access to the back side of a fastening, aluminum rivets are used. The rubber washers help make the drilled hole water tight from water that might splash on to the accessory being fastened by these rivets. The package includes a nylon pad eye, aluminum rivet, and rubber washer.

Brand: Booms Fishing

👤Work well! When securing items to my kayak, I prefer to use rivets. I used to secure elastic bunges to my fishing rods with eyes and rivets. Will purchase again if necessary.

👤They are perfect for rigging a kayak. The screws in plastic are not as strong as the rivets. I used these to set up an anchor trolley on a pelican. Attach a coat of Silicone and rivet pad eye to the hull with a 3/16 hole drill. The rubber gasket between the rivet and pad eye and the Silicone gasket between the pad eye and the boat hull are on the rivet. The rivet tool will be set for good after three squeezes.

👤I have not had a problem with the pad eyes or the rivets. I tried to use the rivets to install the rod holder, but they did not break off cleanly. That is my fault. You should be good if you use the rivets with the pad eyes. Very study about plastic. Make sure to use Marine Sealant. After drilling the holes, cover them with a good amount of sealant and use the rivets. If you give it 24 hours to dry, you will be good to go.

👤The rubber o-rings are on the rivets and will be above the mating surface of the kayak and eye hook. I don't think the o-ring should be between the mating surfaces. You need a rivet gun.

👤These were used for tie down points on my kayak. Silicone was applied to the underside of the pad eye. Press the rivet tool against the rivet with your free hand. This will help make sure that the rivet doesn't get jammed. These are strong.

👤A friend of mine gave me a kayak, but it has been sitting out for a long time. Got these, and several other things, and fixed it all up. These are very similar to the originals. They were able to hold the entire kayak on just two of these, because I messed up and used them for the wrong purpose. I need to get more now that I ran out.

👤I used a small amount of silicone to make sure there were no leaks. I am just waiting for the bungee cord to arrive and it is lightweight and strong. I mounted 6 loops on the front of my kayak to keep my small day pack easy to get on trips. If your kayak does not have them already, I would recommend this as the easiest and most cost-effective project you can do. I own every kayak.

👤Attaching accessories to your kayak is the best bang for your buck. You can put something in a spot where you don't have access to the inside of the hull if you want to. If I have to attach things to my friends kayaks, I'm buying a second pack.

2. YakAttack Leverloc Anchor Trolley 2016

YakAttack Leverloc Anchor Trolley 2016

The anchor trolley is the first of its kind. All necessary hardware is included for installation.

Brand: Yakattack

👤I sold my old kayak and bought a new one. I had to get another one of these trolleys because I missed it so much. Installation takes a bit of planning on where you want the cords to run and how you want them to run. It's easy to use my stake pole if I want it to go through the ring or back of the kayak, it's just 888-353-1299 It's not cheap. It is well worth it. There are lots of videos on the internet showing how to install. There is a video that will show you how to install a kayak.

👤I have a trolley on both sides of my kayak so that I can line up my kayak in any direction without having to fishing over my shoulder and sideways. When standing up in a SOT Kayak, I can aim myself in the right direction.

👤The manufacturing companies do the same thing. Take ten cents worth of plastic, mold it into a two dollar part, then add the word kayak to the packaging and sell it for forty dollars. This is the best trolley out there.

👤Installation is quick and easy. They have a helpful video on instillation.

👤I have a second anchor trolley. They are easy to use and work well. The design is good.

👤You should get a trolley if you don't have one on your fishing kayak. Control of wind and current is great.

👤It works like it says. I've bought a lot of different types of anchor trolleys.

👤I was expecting better quality. This is cheap plastic. It is not certain how long it will last.

👤The kit de instalacin is very important.

👤Fcil instalacin, me gusto, y todo viene en plastico para evitar oxidacin y el ruido.

3. Intex Explorer 2 Person Inflatable Aluminum

Intex Explorer 2 Person Inflatable Aluminum

A plastic storage box is included in all MadBite Fishing Tackle Kits to make it easier to get to the lake or river. The see-through lids allow you to see your tackle before you open it. These plastic boxes are great for bass fishing or trout fishing, they fit in backpacks, tackle bags, boats and more. The Cockpit is designed for comfort and space. The dimensions are: The maximum weight capacity is 400 pounds. Directional stability can be achieved with aremovable SKEG. In case of an emergency bright yellow color helps visibility. Explorer k2 is made for smaller bodies of water.

Brand: Intex

👤We are experienced Kayakers who have other hard sit on top and sit in kayaks. This was the first inflatable we had. Our purchase turned out to be a great one. We use it because we don't have to carry our expensive kayaks on our vehicle for hundreds or thousands of miles, and worry about them being stolen when we camp. We have used the Intex Explorer on the ocean inlet canals and it works great. The water is smooth. Our limit is about 1 1/2 to 2 hours before we feel cramped and need to take a break. I am 6'8" and my wife is 5'8". The kayak is short for two people, but anything longer is more money and we make due. The Explorer K2 tracks well when using good paddling technique. It tracks very straight when we paddle hard and fast. The rear will start to swing out when it stops paddling. It's not a big deal. The materials seem to be durable. The only things we would like to change are the inflation valves on the floor and the front and rear bow and stern covers. The cheap flip out valves are used on inflatable pool toys. The nice valves that don't let air escape when you pull the air pump out are the ones that inflate the sides. Again, for the price point, we think they have to cut corners somewhere. This is an amazing value for the money. deflation is even quicker with set up and inflation using the included pump. We may upgrade to a longer inflatable kayak at some point if we start using the Intex more and more. We would buy it today if it was made by Intex. The Explorer K2 is a good way to go if you want the convenience of a kayak, and you want to save money. Click Yes if you found this review helpful. Thanks a lot, Willy C.

👤I inflated it in my living room, but there wasn't a stream or a river in the box. I think I have to add my own. I tried to put it in the bathtub, but it wasn't big enough. I tripped over an oar and pulled my shower curtain down. I hit my head on the side of the kayak, which was good. I couldn't get out of the tub because my legs were stuck in the shower curtain and the kayak was on top of me. My dog licked my face after he thought it was funny. I turned on the shower when I grabbed for something. I pretended my lawn was a level 4 white waters thing after I got the bathroom aired out. The sprinklers were activated in the middle of it all. The dog jumped on me again. I strapped the thing to the top of my car and drove to the nearest mountain stream. The kayak was both inflatable and deflatable. The wind was trying to pull the kayak up off the car, but I tied it tight so it wouldn't move. It's a bad thing on mountain roads. The car went off the side and rolled over, landing on its top in a mountain stream. We floated all the way back down through Golden, past the Coors factory, and out the east side of Denver, after the car upside down on the kayak and the mess in the stream. The car was totaled. The kayak was great. I think it's a good idea. Make sure you deflate the mountain stream before tying it to the top of your car.

4. FHelectronic Pieces Fishing Holder Accessory

FHelectronic Pieces Fishing Holder Accessory

Installation in a 2” hole is the size of the 8” inside diameter. The soft black gasket has a flip-up cap. Older holders can be replaced or upgraded. Quality materials are used. It's suitable for fishing rod holders. It's suitable for fishing rod holders.

Brand: Fhelectronic

👤They came quickly but not universal. They don't stay open on my rod holders. I own an Old Town gun.

👤Doesn't fit rod holders.

5. FARWATER Canoe Anchor Grip Accessories

FARWATER Canoe Anchor Grip Accessories

You can keep the tackle box in your pocket or fishing bag, because it is only 6.7 x 3.9 x 0.87 inches. The boat is anchored with this deluxe gripper. The small anchor for kayak is fitted with strong gripping teeth and claws and can be used to anchor a kayak. It's pretty easy to hook up this grip brush. Attach the brush grabber to any object, secure it to your canoe or kayak, and pull the paracord tight. No more loud splashes when using this kayak accessory. The fishing kayak accessories won't cause any problems. These kayaking accessories are built to last. The brush boat anchor has a powder-coated steel finish. Can't decide on a gift for someone who loves fishing, kayaking, or boating? Their accessories for kayak fishing are a great gift for a friend or loved one.

Brand: Farwater

👤If I needed an anchor for my kayak, I was on the fence. This is perfect and I needed it. It was easy to use. It can be used to almost anything.

👤I can tell this will work because I grabbed a tree branch in the yard and put some weight on it. It's well built and the powder coating looks good. There's plenty of cord included and the instructions for the route were easy to understand. It should be able to take a beating.

👤Well made and priced. If they can come up with a replacement anchor for deep water.

👤An addition to my kayak. It was easy to set up.

👤Great product! The grip is perfect for kayaking. The package was on time. If I drop it, I won't lose orange.

👤If you anchor it to something that will hold you, this item will be better.

👤The packaging was well packaged. The anchor is very well made. The plastic isn't feeling bad.

👤It's so perfect! It feels strong and durable.

6. Bombrooster Fishing Kit Fish Accessoriess丨 Fishermen

Bombrooster Fishing Kit Fish Accessoriess%E4%B8%A8 Fishermen

Can't decide on a gift for someone who loves fishing, kayaking, or boating? Their accessories for kayak fishing are a great gift for a friend or loved one. TheBombrooster fishing tools set includes a foldable landing net, fish pliers, and hook removal. Fishing tools help you catch and release fish. A gift idea for fishermen or people who love fishing. You will be able to see this. It is a perfect addition for kayak fishing, compact and lightweight, it could fold up to a tiny profile for storage. It is large enough to take large fish and crabs. It is an awesome, durable net made of exquisite craftsmanship and anti-skid handle. The hook removal is made of aluminum alloy tube and a non-slip handle. The tool saves fish lives from swallowing hooks. The enhanced fish grip made fishing safer and easier. No longer do you touch the fish with your fingers. You could protect yourself or the fish with Bombrooster. The lanyard avoids accidental loss and the non-slip design makes it possible to hold the fish firmly. TheSheath is equipped for protection and easier transportation. This nice compact plier is easy to use and can be used to unhook easily. It's perfect for cutting lines. Don't remove the hook with your hand, it will hurt the fish.

Brand: Bombrooster

👤The folded net is very nice, the needle nose cutter is very sharp, and the flora is just fine, I told all my friends about this.

👤It works well in a shallow sided boat on a very low dock. The handle is too long for most other uses.

👤You can have all of the essential tools for fishing in one convenient package. The net folds quickly.

👤I got it for my new kayak, just make sure you tie it down and don't be me... Get excited and forget that you are in a kayak, it does not float.

👤Useful! The pliers are made of aluminum, and that's what I expected.

👤This kit is so helpful that everything is just what you need.

7. Borogo Watercraft Replacement Steering Accessories

Borogo Watercraft Replacement Steering Accessories

The kit also includes rope. The Kayak Rudder is Approx. 47 *15.5 The measurement is 14.2 cm / 18.2 inches. The length of the Rudder blade is Approx. 45 cm / 17in. The pin is made of nylon and 304stainless steel and has a diameter of 0.48". The installation and use is able to be secured when in the raised position to prevent the rudder from self deploy;wires run from the blade to your foot brace which are used to control the rudder during paddling. The controlling direction is on the stern of your kayaks. Work with foot control to achieve the effect of direction change and designed for seayak, kayak, canoe, angling boat, etc.

Brand: Borogo

👤This was what I needed and it was not expensive. I couldn't make one for that price. It seems to work well and is made from good material. Other rudders are much more expensive than this and are almost as expensive as the boat. I like it. I would recommend someone to home brew. If you're not handy, don't try this. It isn't plug and play. If you don't have the rest of the mount and steering system, you will have to engineer it. I'm mounting it to a pelican trailblazer that isn't designed for a rudder. It does mount to the boat without modification, as you can see in the pic. A steering system and a different mount will be added. The product is from china. It arrived in a bag a month after I ordered it. A box would have been nice as it was poking out of the bag. It is a strong plastic and did survive the trip.

👤I wanted to add a rudder to my kayak. The cost of an original rudder kit is $299. The product is very nice and comparable in quality to the rudder I saw on a new Predator. There are no instructions for mounting or operation. I would recommend it to people who are willing to deal with issues adapting it for their kayak. After several hours and a lot of money, I have a working rudder. The new rudder improves my kayaking performance. Rudder stock from a local metal scrap dealer can be used to make an accessory. Modifications to foot pegs for steerage cost $30 and include various steel bolts and screws.

👤I bought a 10SS and loved it for a day. I realized that the boat wouldn't track straight when I went out for the second time. I was using my energy to keep the kayak straight. The boat would turn around when you stopped paddling. The design of the kayak makes it hard for it to be paddled quickly. I didn't like my new kayak. I was stuck because I couldn't find a place that had kayaks in stock. I did some research and found a retractable Skeg to be the way to go. I didn't like the rudder's brackets. The rudder pin is not a standard size and would not fit any other brackets. The drain plug was used for the seal. The rudder steering wings were attached to the kayak with screws and two holes. The cable was raised and dropped with the help of a carabiner clip attached to my seat strap. It's important. My next river day was amazing, and if you decided to use this as a skeg, you can drop and pull it from your seat. On a windy day, my tracking was perfect. I fell in love with my new boat again. The kayak would follow whatever line I picked. My paddle speed was improved by it. The rudder has taken a bit of abuse, but there is no damage to it after months of use. I traded my kayak for a new one.

8. Fishing Aluminum Saltwater Freshwater Multi Function

Fishing Aluminum Saltwater Freshwater Multi Function

It is possible to cut braid of any pound test with the Micro Serrated blade, which is made from the same type of 304 STAINLESS STEEL as in freshwater or saltwater environments. New aluminum fishing pliers have a hollow out design and are machine cut for reduced weight. The locking mechanism has been upgraded from a tip collar to a buckle. The pliers are easy to carry around and open easily, thanks to the higher quality spring loaded handle and nylon sheath. The pliers and grippers are ideal for both freshwater and saltwater environments. The handles are suitable for long time fishing trips. Tungsten Carbide Cutters are used. It's easy to cut the strongest braided lines, the heaviest mono leader, the fly lines and backing lines with the fully replaceable stonketed cissers. This fishing equipment pliers is a perfect gift for your family and friends who love fishing, it is suitable for fresh water and harsh saltwater environment, it is a wise choice for your family and friends who love fishing. This fishing equipment pliers is a perfect gift for your family and friends who love fishing, it is suitable for fresh water and harsh saltwater environment, it is a wise choice for your family and friends who love fishing.

Brand: Quapkatt

👤He loves fishing and received a gift for it.

👤If you don't have a set of pliers for kayaking, you are doing a disservice to yourself.

9. Anndason Black Storage Fishing Boating

Anndason Black Storage Fishing Boating

Work with foot control to achieve the effect of direction change and designed for seayak, kayak, canoe, angling boat, etc. The outer diameter is 26 cm. Material: 20 cm /8'' The material is high quality and has a long life. The red waterproof bag was designed with safety in mind. The hatch is removed from the car. The special design protects from damage. It's convenient to install and remove. The Hatch Covers help to reduce UV damage to your hatch and minimize the light entering your boat.

Brand: Anndason

👤The 8in hatch was a good fit for my kayak. The opening on my boat was just short of 9 inches and the outer ledge was just over 10 inches. This was a close call with the location of where the holes had to be drilled, but it fit fine. We used Silicone to top off the screws. The bag is large and reaches the bottom of the boat. The bag can be removed. I will have to check if the bag is waterproof. The foam gasket has no issues with outside water coming into the hatch. Very happy. Good price! The bag is not waterproof. Any water that gets into the boat will be wet. Line the bag with a plastic bag if you are really worried about it. I usually use it as a trash can. Still would purchase again.

👤The rear hatch worked well on my car. I was not able to justify the price of a Hobie hatch. The water resistance is ok. A few drops of water made their way into the kayak after a heavy wash. There wasn't enough water to worry me because I have some electronics mounted in the kayak just in front of the hatch. The included hardware is very high quality. If you are thinking about putting a rear hatch in your Hobie, I highly recommend this. Good luck!

👤It works well for Ocean Kayak. An old Kayak will love this upgrade. The product was closed and upside down. The hatch lip was cut with a multi tool. The hole was traced with a black sharpie. The final cut was made with a battery powered jig saw. The rivet was used to install it. Use 2 temp screws to hold in place. Then drill holes in the Kayak. After riveting all but the temp screw holes, remove screws and rivet the final 2. It's important to have the hatch open away from the seat. Cleaning is easy with a bag. A good one.

👤These are great for the price. It was installed on a perception rambler. These are the exact size for the large premolds.

👤The hatch is sturdy and works well. The only reason I gave a four star review is because of the self tapping screws they give you, I would have preferred to drill my own holes and install screws with locking nuts instead of the sharp points that come out. It would be nice if these came with the different hardware, I will pick up the hardware myself and install with nuts.

👤The project went very well since there was no hatch in the rear and the kayak was a lifetime hydro 8' 0" series. It's important to add saliva to those who are prone to fastening.

👤This can be a great enhancement for plastic kayaks. If you don't have a cargo spot and you have a flat spot on your hull that is both reachable and behind you, this is a great addition. I put a lot of effort into positioning this well. I usually leave the bag liner in there, so I can reach the food/bev which I can't really see, but I feel around behind me. It's a nice option that I can reach directly into the inside of the stern when I'm not inside the boat.

10. Pelican Sit Top Kayak MBF10P100 00

Pelican Sit Top Kayak MBF10P100 00

We will provide a variety of solutions for you to choose, if you have any problems, you can contact them. The stability needed when reeling in fish is ensured by a multi chine flat hull bottom. The SENTINEL 100X ANGLER is easy to transport and store. The SENTINEL 100X ANGLER is made from patented Ram-X materials. The best way to clean your kayak is by using soap and water. The storage compartment is a perfect fit into the tank well. Their unique manufacturing process allows them to include additional flotation inside the hull of all of their sit-on-tops in order to meet or surpass the standards. The maximum capacity is 275 lbs.

Brand: Pelican

👤We were happy to find the kayak on Amazon. The quality is very good. My wife likes the open design. It has convenient handles molded into the sides for easy loading and unloading. There is a rubber mat on the bottom so items don't slide around. The seat is comfortable. We are very pleased with the product. Now for shipping... The Kayak arrived 3 weeks after it was scheduled. We were given the option of cancelling the shipment and getting our money back, but we chose to wait. Amazon explained that someone had to be at home to sign for the package. It didn't happen. It was dropped off on our yard by the shipper. It must have been dropped by whoever they had delivering it because there was a small scratch on the bottom of the boat. We wouldn't return it, but we should have a word with the shipper.

👤I had to include a picture of my happy face because I love this kayak. I've been looking for a kayak with all the basic features I wanted, but stock is low because of COVID-19. I devoured it before it sold out again. It came quickly, I love the storage container, and it came with bungee cords. I went over some rocky rapids and drank my open drink in the shallow cup holder. The only complaint I have is the seat's position. The hard plastic of the kayak made my tail bone tender after a few hours, though the padding was great. I will either replace the seat or sit on a towel for a cushion. We had a place to run ropes through when mounting the kayak to the car.

👤There was a big hole in the bottom of my kayak.

👤I haven't had it out on the water yet but wanted to review it quickly. It took 2 days for free shipping. #2 I assume Amazon has made changes after others experienced problems with the above mentioned. Can't wait to get it on the water. It would be great if it came with a paddle. It should be included in the price. *

👤Really? This is a kayak? I was excited because I thought I would get the exact one. I got something different. Very disappointed.

👤The recreational kayak was out of stock when I bought it. I was worried that I wouldn't like it. I really enjoy it. The two spots for fishing poles are useful for other reasons. The seat is more comfortable than the other kayaks I've used. I didn't give it a 5 because of the fact that there are some hooks located near the area where one paddles, which at times I've hit and have cut my hand. I will have to put something over it to stop that in the future. I was happy with my purchase.

👤The Kayak is perfect for the price. It is very strong in the water. We have yet to see a better Kayak at this price point.

11. Hitorhike Fishing Universal 360 Degree Adjustment

Hitorhike Fishing Universal 360 Degree Adjustment

Most newer model index boats are compatible. Universal fit: Fit spinning reels, fly reels, boat reels, baitcaster reels. It can be adjusted vertically and horizontally for most boats. The long-life guarantee is made possible by the use of the eco-friendly, strong and anti-corrosion material. There is a professional boat rusty series. They have fishing rod holders and mounts that fit together perfectly. Inside pack: Fishing rod holder, basic mount, screw cap, and gasket. Purchase is risk-free. A 120-day money back guarantee and a 3-year warranty are offered by them. Buy with confidence.

Brand: Hitorhike

👤This was installed on my Pelican Ultimate 100. I had to go to the hardware store to get shorter screws. At my store, the screws are M6 Metric, which is quite a bit more expensive. The next size down was too loose because the next size was too large to fit in the holes of the mount. It was easy to install, looks nice, and works as it's supposed to. If you want to set the pole in the cabin and have the top rest there, it has a little notch at the top. The screw issue caused me to remove one star. It would have been hard for the screws to fit in a sit-in kayak.

👤I thought a rod holder was a rod. I buy a lot of rod holders when I am on a charter boat because I like fresh and salt water. Twelve years. These rod holders are very strong. The Engineering & Design is better than anything I have seen before. I will get more. It will look good on any boat.

👤I wanted to put a couple more rod holders on my boat, so I bought these. I was very happy to see the product out of the box. It seemed like a good quality. It mounted very easily and seemed secure. The rodholder flipped and my rod flew off to the bottom of the water. If that is the case, it would be a 10 lbs fish. Was fishing close to the shore. The inside is made of plastic ridges. It's not just the money you spend on the holder that's at risk. I lost a rod and reel. The second one was used to hang a flag on the back of the boat. A small flag. The first broke about 5 minutes after the second one.

👤This is a high quality rod holder. I was trying to decide between this holder and the generic ones on Amazon. I'm very happy that I used this holder. The price difference is almost nothing and this holder is better than the no brand holders. This holder is large as well. It feels very rugged. It has a rod lock feature that will prevent a rod from being yanked out of the holder and a back stop feature that will allow you to place your rod at different depths in the holder. The holder mount that comes with the holder is fine for most applications, but you can also purchase different style holder mounts for a wide variety of applications. It's a nice rod holder. There is no reason to use the no brand holders when you can get this one.

👤I was fooled by the title description, but it was wrong. If you chose the x2 Rod holder kit, they will send you 2 rod holders with no mounts, so you can't do anything with them. I contacted multiple agents who told me I was stupid and I didn't buy mounts. I had to buy more mounts because I was screwed. This would be a great product if they changed the description. The quality of the rod holders is good, but they don't do anything if you can't mount them.

Summary

What is the best product for fishing kayak accessories kit?

Fishing kayak accessories kit products from Booms Fishing. In this article about fishing kayak accessories kit you can see why people choose the product. Yakattack and Intex are also good brands to look for when you are finding fishing kayak accessories kit.

What are the best brands for fishing kayak accessories kit?

Booms Fishing, Yakattack and Intex are some of the best brands that chosen by people for fishing kayak accessories kit. Find the detail in this article. Fhelectronic, Farwater and Bombrooster are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com