Can be attached with screws permanently. The rack has 6 rod clips stores and displays up to 24 rods. 2 freshwater rods or 1 saltwater rod can be used. The base plate has a glide system. There are padded slots on the base plate for rod handles. No tools are required for assembly of the rack.
👤I was very excited to find this for sale on Amazon, it is exactly what I have been looking for. It took me 5 minutes to assemble the rod rack. I did not need any tools. I noticed the design flaws after I put it together. The description says it can hold 24 rods. Not all of the reels will fit on the 24 rods. The clips are made out of rubber and barely hold the rods in place. I had a few of my rods pop off and hit the floor as I was trying to adjust my other rods. I folded the reel handles on my spinning reels, but I was not able to put my rod and reel combo on this rack. The top part of the rack shifted so quickly that I had to gently spin it to get it back to where it was before. I am at a loss as to what to do with this rack, I am really disappointed with it. I guess I will keep looking for something that will hold all of my combinations. If you only plan to put a few rods on this rack, I highly recommend you use the inner slots or your rods will end up on the ground. If you plan on using all 24 slots, I recommend you look for something that holds more than 24 rods, which is exactly what I plan on doing. I will post pictures soon.
👤The product was delivered in a couple of days, and I needed it to hold rods with ease. I'll probably get another one as one won't hold all my rods. The rack was knocked over, full of rods and reels, and one of the connecting bolts on the upright broke. The repair wouldn't hold up when I tried to put it back in. I used my credit card to purchase the part. I told Laura my story. The wife tripped and fell on it. I got the part in two days after Laura said they would send it out for free. I will continue to do business with this company. Customer service is the best.
👤I bought a light-colored holder to hold fresh and saltwater rods. The four screws that hold the swivel mechanism to the bottom piece with the rod holders were pulled from the material that was packaged well. The four screws were relocated quickly and easily. The rod holder is very stable. It's easy to get to the rods. The depressions on the base are shallow. I really like the material used to hold the rod shanks. It is easy to remove the rods from their place. There are also holders for two-piece large-diameter surf or trolling rods that can be used to hold two smaller rods. The rod holder was perfect for my needs. It's perfect to organize the fishing rods of multi-species angler.
👤A gift to put away all the rods leaning on the wall of the barn was the Spinning Rod Organizers. I had it ready for loading in less than 5 minutes. There were 5 pieces. It took me a long time to load it up. I can see where it wouldn't be able to hold as many rods as the product claims, but if you can use it for almost that many. I didn't bother to count them before ordering, so I bought it for less than the number it claimed. I knew we had some. I did not put two in the doubles, but used almost every slot. I don't think they could hold two with reels. It has made the rods more manageable and they should be tangle-free now. I don't know if it would hold up to being dragged around, but we will use it in the corner of the barn, so that isn't an issue. It looks great! I can't tell you how much better they look on the rack compared to the leaning heap.
Red on black design with Bar Tack construction. The 24-Rod Rack is designed for the avid fisherman. This rack is built from a rust resistant aluminum frame and is portable and easy to assemble. A large capacity protects and organizes a rod collection of up to 24 fishing rods or 12 fishing rods with reel attached. The one BASS rod rack is great for any type of fishing pole. The rod can be hard to move and protect it from scratching if the EVA grooves are Friction of EVA. The ONE BASS rack is a great option for a cluttered garage or even as a storage solution on your boat, it can hold a large collection of poles without taking up too much floor space. It's easy to assemble fishing rods on a boat, truck, home or garage, even in your bedroom, without the hassle of putting it together. There are no tools required. A great gift for the fishermen. It's easy to assemble fishing rods on a boat, truck, home or garage, even in your bedroom, without the hassle of putting it together. There are no tools required. A great gift for the fishermen.
👤We all know that we need to protect our investments. The concept is good, but it could use some improvements. There is one The rubber and plastic trim is very easy to glue. There are two Rolder stores rods on the backside. There are more than one 3). The rods are to close together at the rod notch. It's difficult to fill every spot. I bought a 24 rod holder. It's not possible because the rods are wider and you need to store 24 without pulling them all down on you. It will be great if engineering can solve these issues in the future. I bought this one already.
👤The rod rack is very good quality and easy to assemble, but if you push it, you will see that it holds 24 rods. I'm very happy that they all fit because you have to have some of them with the reel facing out and some with the real facing in.
👤It just meets expectations. If all the rods in the rack do not have a reel attached, it will hold 24 rods. It will hold 6-7 per side if you reel on. It is not very sturdy, the biggest thing I don't like about it. It will sway side to side with the most subtle push. The black end caps on the plates on the bottom prevent them from coming out, but you can clip them in place. It could be better.
👤The rack is a good value. If you have anything other than light tackle and small reels, it doesn't hold 24 rods. It can hold larger reels and smaller rods. It is lightweight and sturdy. The quality was better than I expected. Everything meshes together well.
👤It's small and holds several rods. If you put reels on your rods, it won't hold what it says it will, but that's normal. It takes a little adjusting to get it to hold everything, but once you get it right, it does pretty good. The heavier rod/reels do not seem to do as well as the lighter ones. I'll probably put small screws in it to keep it together. I would buy it again, but my neighbor bought one after seeing mine.
👤The rod rack is great. If you are looking for a sturdy lightweight fishing rod rack, look no further. I had a rack that was twisting and my rods were falling out. The rack holds all of my rods. It is easy to assemble and save space. I would definitely recommend it.
👤Good materials and a nice rod holder. It is very light and can be tipsy. Half of the number with reels can be held without reels.
👤Well designed and made. Assembly instructions are useless. The only way to put it together is to find a part that fits in the product picture. It's a simple product and easy to assemble. The package included a bag of parts that had no apparent purpose, so you have to figure out where they go.
Please store your fishing rod in the opposite direction, it's aperture Horizontally stores 4 rods neatly and securely. There are 2 racks. There are 5 fishing rods. It was included. (). There is no fishing rod. It's easy to install and put together. Hardware is included. You can organize your rod and reel combo in a garage or workshop. Store the other fishing rod in the opposite direction. Save your space by organizing your garage room. Convenient storage can be created by utilizing extra space in the garage, cabin, and boat rooms. Keeping the space neat and organized. The frame is super light and lightweight to prevent damage to your fishing rods. It is easy to assemble. It's great for storing fishing poles on a boat, truck, or at home. It's great for storing fishing poles on a boat, truck, or at home.
The size of theRACK is 23.19 inches. L x 2.56′′ W x 0.259′′ H is a premium storage solution for your fishing gear. A multi-purpose fishing pole storage system has 2 rod clips. The dual rod clip technology allows 2 freshwater rods or one saltwater rod. Four utility boxes are not included. There are padded slots on the base plate for rod handles. The rack is 22.83"L x 14.37"W x 23.74"H.
👤This is too short. The reels are the same height as the top rod clips, so it doesn't fit my saltwater rods. My micro rods are too thin and slip out of the rubber rod clips. The rubber rod clips are designed poorly, it is easier to pull the rods out than to put them in. I have to use two hands to put them in the clips and I only need one to pull them out, I would rather it be the other way around. The rod holder positions are too close together. I pull one rod off the rack and it pulls one of the rods next to it out of the rubber clip. If the clips held better, that might not be a problem. The rack is not as solid as it should be. It has good stability. It is questionable. I mean when I rock it backwards and forwards. It makes cracking noises when I do the same thing. It should have at least 6 bolts in the bottom and one more permanent shelf. The pieces that take the #8 screws should have been at the bottom.
👤I was impressed by the weight of the package, which usually points to a degree of sturdiness. Things went downhill from there. One could see that it was not cut straight. The rubber rod holders were not completely detached. The American company who "test and design" the products they market and sell don't monitor quality control was the first thing that came to my mind. I would send it back if it wasn't so hard to disassemble and repackage.
👤I was looking for a rod rack that would hold all my fishing gear. I was a bit skeptical when I found this because it didn't have any reviews. I'm glad I made the purchase. It is very easy to put together. You may need a drill for the screws. This product is amazing.
👤ZERO STARS is not an option and that's why I gave this product a 1 star. The vinyl surface was damaged in several places and buggered around one corner. The plastic edge strip was unglued. The rod clips are stiff and cheap. I will have to replace them with rubber clips. This is junk.
👤I've been looking for something similar in terms of rod/tackle storage. I put everything together in less than 10 minutes. There are a few screws that hold everything in place, and you need an Allen wrench to install the feet. The rack is too short to hold saltwater rods and the butt is too thick to fit in the rubber clips. It could be built a little more solid. I had to nail the rubber clips back in after one of them fell out. I am happy with the purchase. This product will last a long time for this weekend warrior.
👤I bought this rod because my other one that I was storing in my garage snapped in half one day when I reached over it to get something I spent around the same price on that rod rack as I did this one, and the differences are night and day. This product is so sturdy that it is easy to assemble just sliding panels in place and put the feet on with two Allen key screws, and it is also as good as a rock in the desert.
The best fishing gift for men is the fishing gear rod storage. The fishing rod storage rack is lightweight and rust resistant. It is extra reliable. The base is made of aluminum alloy and EVA materical, it can protect the fishing rod bottom from damage. The fishing rod holder storage rack can hold up to 24 fishing rod of any type. It takes up less space with the compact design. Their fishing pole storage can be used for many things. The fishing rod rack allows you to organize and display your fishing rods using soft clips at the top and a padded base-plate at the bottom. The rod clips design allows you to adjust the spacing between the clips freely. It can be used to hold up the fishing rod and keep it in place. You can add the number of rod clips you need. It is easy to install. There was no tool needed. It is a great gift choice for the fisherman. If you have a question about the installation, please contact them by email or use the specific installation steps at the discription.
👤The Goture rack was easy to assemble. You can't put something together backwards if they make it. The instructions were easy to follow. The previous generic rack was just as nice. You can see the difference in quality when you compare the two sides. There is a Goture is the winner. The caps fit snug so you don't have to worry about anything falling apart when moving the rack around, and it's a lot more sturdy than other racks on the market.
👤I couldn't get the Kastking again, so I ordered three of the same design, which seems like the exact same design. I ordered multiples since every unit was poorly manufactured. I had to match the base pieces that hold the butt ends of the rods. Only one unit has a component that is holding it on. The mfg control was veryppy. If you can find it, buy it. I added caster to make it easier to push these things around with my rods loaded.
👤I didn't think this would be big enough, but I ordered it anyway. I didn't use the instructions because they weren't great. I had to disassemble a few parts and reassemble them. It took 10 minutes to put it together. It holds everything I need and is just as large as the model I keep at another house. I'm happy.
👤The instructions are so small that they are useless. I ended up in Canada. Glue them together. They need to work out some things and I hope I didn't spend my money on that.
👤The rack is pretty nice. It's easy to slap together, but instructions are lacking, and there are a couple ways you could do it wrong. It is light and has good spacing for rods. My rod and reel combo are in a nice place with room for me to purchase more. It is the best solution I have found and I have bought many of the wall hanging ones. This is better than those.
👤The good thing about it is that it holds all types of fishing equipment. It looks good and adjusts well. The directions are terrible. They are not easy to comprehend. You will be fine if you are mechanically inclined. Two sets of hands are needed for screw alignment.
👤I bought two more because of the product. It's easy to set up. It holds my reels and rods. Instructions were easy to understand. A quality item made in China. I have over 50 rods for all types of fishing, and this product helped me organize.
👤Sturdy and organizes his rods. He didn't like that it didn't hold his rods well. Unless they have reels, you won't fit 24 rods on this.
There must be 4 handles in the car, otherwise the storage net cannot be fixed. The nylon fishing rod rack is light and portable. It is easy to carry and install. If you want to store your rods in a garage, you need to apply. It keeps your rods out of the corners of the garage. You can change the distance of the storage hole with the help of a spring cord lock. The extra cord lock can be added. The rod organizers will help you keep your fishing poles out of tangles. It is easy to keep poles from getting tangled on the wall. Delivery with the installation accessories, cord lock, non-trace nail and adhesive hooks is convenient for your mounting work. Delivery with the installation accessories, cord lock, non-trace nail and adhesive hooks is convenient for your mounting work.
The rod rack can hold up to 6 rods. The foam grip pads hold rods securely. A lightweight plastic design. It is a long lasting proof of corrosion. 6 rods are neatly and securely stored.
👤Two people need to be hit. 1. The person decided which screws to include. The person agreed. The rack is great but the screws are terrible. They are flat head. Is it a flat head? Who uses flat heads now? There was a terrible decision. They're only about the same length. The mount point is thick. You know what it is? Hmm? You are correct. The screws don't reach the studs in the wall. Do you see the issue? Pulling out the rods from the brackets. How long do you think it will take for the rack to fall off the wall and the expensive rods to fall to the ground? Okay. Maybe it's not that hard. You know what I'm talking about. Not sure about you. I wouldn't trust these tiny screws in the wall to hold my rods and reels, they are 16" apart, and no drywall anchor is included. Most framed walls allow you to mount. The screws are long enough. rant over. The screws were replaced with 1-1/4" drywall screws. I'm not worried about the rods falling off the wall because they are now organized and off the ground. If anyone from Berkley is reading this. The wall mount rack is very good. Still. I mentioned those two people before.
👤It was perfect. What I was looking for. There is vertical support for 6 reeds. The plastic material has a good finish. I have used it for 4 spinning rods with their 3000 and 4000 reels. Pros. The material is resistant. It can be mounted for different lengths of rods. The base in the vertical kit has front support so it can be mounted horizontally and still hold the fishing rods. The upper support has high density foam. There are screws for wall mounting. There are Cons. The screws are good for wood, drilled brick or concrete, but not for plasterboard walls. SPANISH review perfecto. Justo, buscaba. Para 6 caas, soporte vertical. Material plastico de gran resistencia. He has a problema con 4 caas de spinning, 1 x 7'0'' medium light, 1 x 7'0'' medium heavy, and 2 x 8'0'' medium heavy. Pros. Material resistente. Puede para caas. En el kit horizontal, la base tiene soporte frontal. Espuma de alta densidad. Incluye tornillos para montar. There are Cons. Los tornillos estn para madera, ladrillo o cemento previamente taladrado.
👤These were easy to install and work well. I worry that the hard molded foam will not hold up over time, but I am careful as I put the rods in and out. The TWSS. It is easy to install and do the job. I don't have a picture of it in use, but I have a great picture of all my girls fishing, so you can see why I need to be able to store multiple fishing rods. There is a better picture.
👤I bought this because it was cheaper than the Rapala rod holders. It is cheaper in every sense of the word. The foam is hard to navigate. I ordered another Rapala rod holder and recommend you do the same, as the far right holder shows the foam missing where it fell out.
Attach the hardware to the wall or over head. The webbing is strong and non abrasive. There are two options, 6 rod or 9 rod system. The holders may be doubled up if needed. Red on black design with Bar Tack construction.
👤I mounted these on a door. I used a drill to drill the screw holes. This step is not mentioned in their instructions. I posted pictures to show you how it fit. The door is short so I mounted the straps all the way up. I left the D rings on the ends because I might use them to hang an accessory with a carabiner. I pulled the straps very tightly over the door's locking mechanism. The locking bar is not interfered with by the straps. I may add 4 more screws to their 6 because the door is horizontal. They were just standard sheet metal screws. The door is a manual lift at the moment, and it did get heavier with all of the rods, but it wouldn't put any strain on the garage door opener.
👤The system is very versatile and can be used to organize all your poles and reels. I hung mine from the bottom of my overhead storage rack after purchasing 2 sets. I used some S hooks and it worked. My reels and rods are organized and look great.
👤I wanted to write a review of this rod storage system because it's so good. I put mine on the exposed studs. The installation was easy. I was looking for something that was easy to use and also provide protection for my high-end gear. I fit 9 rods. They slide easily into the soft loops without the risk of bending the guides or scratching the rod. There is no bow or bend in the rods when I placed the straps 48" apart. It was important to me that the rods were well supported. The added benefit is that all the rods can go in the same direction, which makes it easier to organize. Highly recommended.
👤I was not sure what I was getting into with this type of rod storage, but I would just return them if they didn't work out. I am very satisfied with this product. They are easy to install and perfect for a variety of different styles of rods. I have a lot of heavy duty fishing equipment in the pics, including trolly rods, bait, spinning rods, surf rods, and fly rods. All are held securely. I can keep a 4' gaffe and a fish net with a 4 foot handle. They are installed on the ceiling of the garage. You can't see the rods from outside the garage when the door is open. I don't have to worry about seeing what I have. I have to use a ladder to get to the rods in the garage, which is the only downside to the way I have them installed. I plan to add a third rod. I would recommend anyone.
👤I liked the thick nylon and strong stitches. The whole thing was screwed into the roof and held my biggest Ugly Stick with reel. The design would have been better if hooks and clips were included so that you could unclip the webbing from the screws and put it back up.
Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" The rod rest is designed with deep grooves to allow it to rest peacefully in place. The distance between the two racks should be adjusted to accommodate your fishing rods length. The rod rack can be mounted on the wall or ceiling to hold fishing rods, ski poles, hiking poles, cue and hockey sticks. It's a great pole holder for your garage, shed, or other storage area. The ceiling fishing rod storage rack holder is made of heavy duty steel and is more sturdy. It can hold up to 8 rods and reel combo. Black powder coated finished can provide maximum protection, prevent the fishing rod from corroding, used for long time. It is easy to install the mounting hardware included. It is easy to install the mounting hardware included.
👤The butt end of the fishing rod and the female end of a two piece rod need to be accommodated by this item.
👤Heavy duty metal for storing fishing rods. works great!
👤I knew I wouldn't be able to get every rod next to each other. I had three sets of mounts for most of them. One more set should do the trick.
The best gift for kids is a telescopic fishing net with rainbow color pattern mesh that is 888-282-0465, this is the best gift for kids because it is 888-282-0465, this is 888-282-0465 is 888-282-0465 is 888-282-0465 The robbery was organized. It holds up to 24 fishing rods and fishing reels. It is raining. The design is waterproof. You can put your rods on the rack. Easy assembly. Rustproof hardware and assembly instructions are included. All components and hardware are made in the USA. 25 year warranty Each rack is backed by a 25 year warranty. 25 year warranty Each rack is backed by a 25 year warranty.
👤The rod rack holds up to about 10- 12 saltwater rods, which are much larger than freshwater rods, due to the size of the reels. It is very sturdy and well made, and it looks beautiful in our home. We will be purchasing another one soon.
👤What I've been looking for! I took 5 minutes to put it together. You get all the hardware and a square bit for the screws. I am impressed. They should make one that holds more rods. If you like me and have a pole, you can use it on the boat, pier, surf, fresh, and saltwater. Definitely worth the money.
👤The garbage rod rack I bought was built like a tank and will last a lifetime. The product and delivery time was great.
👤I knew this would help my son because he has been taking up all parts of my garage with his fishing gear. He has filled it up. I need to buy him another one.
👤It's easy to put together. It was well made.
👤It's easy to hold my rods and it looks good.
👤Very good quality and easy to set up.
👤You can't fit 24 rods in it, but I love it. Unless you have reels. If it has a reel on it, I had to go to every other store for it. That is the only complaint I have. You have to have a drill to go together in 10 minutes.
👤There is a decent number of off-shore rods. It is not made from Starboard. It is expensive for what it is.
It takes a few minutes to install with the screws included. The product is 15 x 2.16" and has a hole of 1.5 inches. There are 2 racks. There are 5 fishing rods. It was included. (). There is no fishing rod. It's easy to install and put together. Hardware is included. You can organize your rod and reel combo in a garage or workshop. Store the other fishing rod in the opposite direction. Save your space by organizing your garage room. Convenient storage can be created by utilizing extra space in the garage, cabin, and boat rooms. Keeping the space neat and organized. The frame is super light and lightweight to prevent damage to your fishing rods. It is easy to assemble. It's great for storing fishing poles on a boat, truck, or at home.
👤It was bought to hold 4 fishing rods. They use a corner spot of the garage to get 4 fishing rods from leaning in. It is very easy to install. The rod handles are too large for the small hooks. To balance the rod with reel across the hangers, you have to get mounting distance correct. It is an inexpensive way to get rods out of the way.
Fishing pole holders for garage door products from Rush Creek Creations. In this article about fishing pole holders for garage door you can see why people choose the product. One Bass and Auxphome are also good brands to look for when you are finding fishing pole holders for garage door.
Rush Creek Creations, One Bass and Auxphome are some of the best brands that chosen by people for fishing pole holders for garage door. Find the detail in this article. Goture, Saim and Berkley are also brands that their products are worth to check.