The Magreel Fishing Tackle Box is built with a thick rugged frame and has a storage solution for hard lures, terminal tackle, and tools. The molded latches keep contents secure. You can adjust the spacing of the rack to suit your rod length, and it holds up to 6 rod and reel combo. TheTILE FUNCTION: You can put your fishing rod and reel combo in your garage, shed, or other storage area. If you remove all the caps when storing your gear in a vertical position, you can stagger your rod and reel combo. Innovative design. The sliding track allows you to add, remove, or modify clips. Easy assembly. You can spend less time on assembling and more time out on the water with assembly. The size of theRACK isFFICIENT: Measures 18.21" L x 3.21" W x 1.46" H for a premium storage solution for your fishing gear.
👤It is a good holder for rods. Rods won't fall out if the clips are in the top. I wish it was a little longer as it cane with 6 holders but I can't store 6 in there without reels jammed in. Only holds 5 rods max and the holders move easily. There are 888-282-0465 all freshwater baitcaster reels. It works.
👤I found a way to use zip ties and a wire shelf to make it easy to move the fishing rods around in the garage. It's easy to install and the rods are organized.
👤This is exactly what I needed to test it. The ability to mount it on a side wall at the maximum height allows for minimal intrusion in the main area made the vertical mount perfect for a condo closet. The flipper upper rod holder is easy to use, it doesn't stress the rod. I plan to buy a second unit.
👤The install was easy, but you need to measure twice and use a level. You need to hold the fishing poles up to the wall before you mount them. Longer poles could hit the ceiling if you mount this too high on the wall. It's made of basic plastic and should hold up over time. I recommend.
👤The supplied screws are cheap and bend easily. The bit tops were drilled out after I bent one screw. The screws were cheap for the loss. The screws are the reason for the loss of three stars.
👤The design is not ideal for a boat. The pieces slide into the bar and are allowed to move a bit so that they don't rattle. It's fine for a garage or shed, but not for a fishing boat that wants to minimize noise and vibration.
👤I needed this for my rod storage. My only concern is whether or not the rubber tab closing off the opening will hold the rods in place as my boat crosses the lake. I mounted this in my boat in the vertical position and believe it should work, but I'm not overly confident that the poles won't bounce through the rubber tab at the top.
👤This is the best rod rack I have ever had and I have bought it three times. If you don't like the reels being bunched up, you can easily add another extension to your collection. The soft foam PCs on the top loops make it easy to get your rods in and out. The setup I have had is the absolute best.
There are gift ideas. The magnetic tool is a great gift for men and women who want to expand their tool collection. It is ready to give to someone. The Innovative Patented Design of the fishing pole holder makes it easy to use and store up to 15 fishing rods or fishing rod and reel combo in less than 18” of wall space. Innovative. The KastKing V15 vertical fishing rod rack can hold up to 15 rods or combo in less than 18 inches of wall space. Most brands only have 6 combo in the same amount of space. Rods and combo can be mounted virtually anywhere along the length of the rod, allowing reels to be staggered at different heights for minimum storage space. The innovative design of the fishing pole rack is easy to use. Push the rod firmly into the large or small v-grooves until the grip material grabs it. The rod can be hung with the thread wrapped line guides above the v-groove. The reel can be attached to a 12” rod. To remove your combo from the fishing rod rack, grab the rod near the rod rack and pull out. The KastKing V15 fishing rod holder is made from a tough material which is resistant to heat, chemicals, and impact. The v-grooves are injected with a tacky thermoplastic material to make sure rods and combo are held securely in your rack. The V15 fishing pole rack has three mounting holes. Two holes are on the center of the wall. To install the rack, you need to determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, anchor for center mounting hole, re-level rod rack and tighten all screws. The V15 fishing rod rack will save space.
👤I have a small space and a high garage that make it hard to store my rods. I ordered the V15 and was able to put my rods in a secure area. The rubber stuff that the V have is strong. I'm definitely thinking of ordering another one.
👤I don't know why this is so good. It is a one piece rack that holds up rods. I put up a penn rod and reel combo and it slid down. If the rod guides were resting above the V, it would stay up.
👤The rod racks were taking up too much space in my garage and were getting in the way. There is a The KastKing 2 pack is 30 dollars. The rod holder gave me more space in my garage. The kit has instructions on how to install and mount to the wall. The design holds the rods in place.
👤I've purchased quite a few of the KastKing products. I needed something to organize the rods in the corner of my garage. The design is great and I liked how many rods were able to fit as other products similar to this usually only hold around 6. It was easy to install and I didn't need to use the two holes on the sides that were lined up with studs. Simply screw it in to the wall with the included hardware and you're done. I had an issue with the rods falling and landing on the floor as I put them into the slots. I had to push them harder into the rubber to hold them, but with more flexible rods, I was worried about them breaking. The design needs work, but I like the idea. If you put the rod to far away from the reel in the holder, it will not stay, it will be hard to get it to close to the reel. I have figured out how to get it to work. It takes a lot of time to move the mount. It works well once you patch the small holes.
👤I just bought my first couple nicer rods and needed to organize so the order arrived on time. It took me about a minute to grab my impact drill and sink the three screws provided in the wall, but I used one of the three drywall anchors included for middle whole. The side holes are 16 in each other and sunk into the wall. The rack is made of plastic and comes in a V shape and U shaped slots for thicker rods. This seems to be a product that is made to last and looks very sharp on the wall.
👤If you have spinning reels attached, you can fit more rods on there than they claim. There is a The rubbery material that holds the rods seems to be of decent quality. It has "memory", which means that with use the rubber gets permanent indentations where the rod is held in place. This started happening on my computer after a few months of use. I don't like that it takes a little force to get a rod out, and that it doesn't prevent the rod from falling if the rubber ever loses its grip. I think the rubber will lose its elasticity at some point, but I don't know how long.
1.5” diameter holders for all fishing pole sizes, can hold 8 rods or combo on either side, 2 handles for easy carrying and transportation, and a fish design on both sides of frame. It's easy to hold up to 6 of your favorite fishing rods in your garage, shed, or for display. Rods are kept secure on the wall by holding and base. A torched wood finish makes a rustic look. There is a variety of reels and rod sizes to hold. The upper and lower rack has dimensions of 17.3 W 2.9 D 2.4 H.
👤Large Grouper set ups are not well held by mounts. One fell on me. The full rod capacity is advertised, but can't fit it.
👤It's perfect for what we need. Looks nice and holds 3 rods.
👤It's perfect for the amount of rods I need to store.
👤It's used for fishing rods. More for display than for regular storage.
👤A great rod holder. It was simple to install and I received it as pictured.
👤What I was looking for. It is very sturdy and holds a lot of fishing rods.
It's easy to assemble fishing rods on a boat, truck, home or garage, even in your bedroom, without the hassle of putting it together. There are no tools required. A great gift for the fishermen. The bass fish themed design has a distressed look. It can hold up to 6 rods. There are clips for perfect fit and alignment. All hardware is included. Stores all types of fishing rods. The upper and lower rack is 23.62"L x 1.95"W x 9.65"H. 21.26"L x 3.15"W x 2.3"H
👤She is short on function but she looks great. The clips for the rod holder are held in by the track. The holders can slide out of the track without a cap or retainer. The holders are on the track. I only use this for ice fishing jigging rods. I come into the room to find the rods have popped out of the holding clips, or the clips have slid out of the track. These are not heavy rods.
👤I want to like it. Great idea. I wish it was made of real wood and not the crappy laminated particle board that came with it. I bought this as a Christmas present. I wish it was packed in a good box and not thrown in a bad box.
👤I assumed the product was made of cedar because it was listed as wood. It is cheap and covered with a fake wood veneer. If this was going to be installed indoors with air conditioning, maybe it is fine, but I was specifically looking for something to mount in the carport of our lake house. It gets very humid and the MDF wouldn't last long. Looks cute. It is more of the same cheap, misleading garbage that has flooded Amazon recently.
👤Not worth $33. They are covered with paper. I bought two different ones. One has a track with a bead and the other is not. The track broke because it was tight. The other is to loose and the rods will slide over. The paper was torn with the installation. Don't waste your money.
👤This was a pleasant surprise. The wood pieces had a beautiful finish. It was installed with the help of wall anchors. A display for vintage fishing rods. Highly recommended.
👤I had to drill into the concrete and it was hard to handle with the small holes in the back. If you go into anything other than wood or drywall, make sure you have the right screw head size. There are wood screws.
👤I ordered the regular and jumping bass so I could mount them back to back. The bass is facing the wrong way. The other one may be backwards too. The board has a veneer. The veneer is made of wood, but it is difficult to tell what species it is. There are exposed edges on the board. The spacing for the rods is too close. Keep that in mind. I have a variety of sizes so keeping them on the rack would have been interesting. I am returning this one and canceling the other.
👤It seems like a decent product. I like it, but I wish the pole handles could be a bit more spread out for reel space, but other than that I like it.
👤Good quality. It was easy to set up. I love the fish. It was a perfect hang in the garage.
The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks. The garage or wall is a ceiling fan. The rod holder can hold up to 8 rods and reel combo. TILE INSTALLATION You can put your fishing rod and reel combo in your garage, shed, or other storage area. The innovative design allows for the rod to hold securely in place by adjusting the spacing from the bottom and top pieces. Easy assembly. You can spend less time on assembling and more time out on the water with assembly. The size of theRACK is 23.19 inches. L x 2.56′′ W x 0.259′′ H is a premium storage solution for your fishing gear.
👤The screws are long enough to get through the wall but not long enough to bite into the stud. No problem, I will just use common screws. Standard screws will not fit inside the holes because the heads on their screws are smaller. I have to either bore out the holes in the rack or go to the hardware store to get the right screws for the product. A job that should have taken five minutes is now 45 minutes. I need to purchase more parts. Thanks a lot.
👤Product is acceptable for price. It's not made out of solid wood, and be careful if you use a drill to put it into a wall, as the drill bits split the wood very easily. Good product. Four stars for the manufacture of particle board.
👤"It does the job" is not a good review. It's made in China from the cheapest materials. You will damage it if you don't install it carefully. I didn't even attempt to install because I was so disgusted with the quality. Corporate America makes a buck off of cheap Chinese labor and material. You should buy a 1x4 and hang it on the wall. It would cost less and be better quality.
👤Garbage. It's not even wood. The mine cracked. When you tighten the screws, the wall anchors spin in the wall. I took it out of the box and it was cheap. This is disgusting. Harbor Freight has better products. Returning. Don't waste your money. Something made of plastic is what you should look for.
👤It is cheap and I am worried about the humidity in the garage. The wall anchors they sent did not work. I tried to turn the screw into them, but they kept pushing. I had to buy more. I don't think I got my money's worth.
👤The junk is pressed cardboard and has a cherry veneer sticker on it. It was split apart when I put the screws in. Get one that is plastic or wood.
👤The pre-drilled holes are not perfect. I didn't drill out the right hole for the screws. I had to blow out the particle board in order to remove it from the ceiling because my bit got stuck. It looked decent, but it was going in the trash.
👤Attach to wall or ceiling with no assembly required. Solid wood, but that was expected. The product is better suited to overhead mounting as reels tend to get in the way of the rod below. This works to organize and store your gear, but may be less practical for a daily use scenario if used to store rods vertically on the wall. I got what I paid for, and I'm happy about it. A little more spacing between the holders would make this more user friendly.
👤Not up yet. Looks right. Excellent!
👤It was quick for overseas delivery. Couldn't find anything else that fit my needs.
👤This was what I was expecting. I had to cut them down where I wanted to put them. They look great and do what I want.
The best fishing gift for men is the fishing gear rod storage. The fishing rod storage rack is lightweight and rust resistant. It is extra reliable. The base is made of aluminum alloy and EVA materical, it can protect the fishing rod bottom from damage. The fishing rod holder storage rack can hold up to 24 fishing rod of any type. It takes up less space with the compact design. Their fishing pole storage can be used for many things. The fishing rod rack allows you to organize and display your fishing rods using soft clips at the top and a padded base-plate at the bottom. The rod clips design allows you to adjust the spacing between the clips freely. It can be used to hold up the fishing rod and keep it in place. You can add the number of rod clips you need. It is easy to install. There was no tool needed. It is a great gift choice for the fisherman. If you have a question about the installation, please contact them by email or use the specific installation steps at the discription.
👤The Goture rack was easy to assemble. You can't put something together backwards if they make it. The instructions were easy to follow. The previous generic rack was just as nice. You can see the difference in quality when you compare the two sides. There is a Goture is the winner. The caps fit snug so you don't have to worry about anything falling apart when moving the rack around, and it's a lot more sturdy than other racks on the market.
👤I couldn't get the Kastking again, so I ordered three of the same design, which seems like the exact same design. I ordered multiples since every unit was poorly manufactured. I had to match the base pieces that hold the butt ends of the rods. Only one unit has a component that is holding it on. The mfg control was veryppy. If you can find it, buy it. I added caster to make it easier to push these things around with my rods loaded.
👤I didn't think this would be big enough, but I ordered it anyway. I didn't use the instructions because they weren't great. I had to disassemble a few parts and reassemble them. It took 10 minutes to put it together. It holds everything I need and is just as large as the model I keep at another house. I'm happy.
👤The instructions are so small that they are useless. I ended up in Canada. Glue them together. They need to work out some things and I hope I didn't spend my money on that.
👤The rack is pretty nice. It's easy to slap together, but instructions are lacking, and there are a couple ways you could do it wrong. It is light and has good spacing for rods. My rod and reel combo are in a nice place with room for me to purchase more. It is the best solution I have found and I have bought many of the wall hanging ones. This is better than those.
👤The good thing about it is that it holds all types of fishing equipment. It looks good and adjusts well. The directions are terrible. They are not easy to comprehend. You will be fine if you are mechanically inclined. Two sets of hands are needed for screw alignment.
👤I bought two more because of the product. It's easy to set up. It holds my reels and rods. Instructions were easy to understand. A quality item made in China. I have over 50 rods for all types of fishing, and this product helped me organize.
👤Sturdy and organizes his rods. He didn't like that it didn't hold his rods well. Unless they have reels, you won't fit 24 rods on this.
If you are not completely satisfied with the quality of the product, they will give you a 100% refund within 30 days after purchase. They offer the best customer service. The 2-in-1 fishing rod holder can be mounted on the wall or ceiling to save space. It's the perfect pole holder rack for your boat, garage, home, shed and other outdoor or indoor storage areas. The rod rest is designed with deep grooves to allow for a peaceful rest. The distance between the two racks should be adjusted to accommodate your fishing rods length. Just take a few minutes to install the mounting hardware. The fishing rod storage rack holder is made of heavy duty steel and is more sturdy. It can hold up to 8 fishing rods and reel combo. Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5"
👤I mounted the two pairs of brackets 4 feet apart in less than 2 hours. They look great and are secure. Thank you for the great product.
The measurement is 42 cm long. The interlocking design makes it easy to expand the rack. Qty: 2 pairs. You should put your rods up to 24. It is made of aluminum alloy. Help protect your rod handle. You can get one for your home, garage or cabin.
👤I love this rod storage rack. You had to clip the rods into the one I had. My custom rods were falling all over the place when I used them, because the gap just widens every time. Talk about how angry you are! I couldn't decide on a good rack so I put it up for a while. I didn't like some of the features they had. I don't want my rods to be dinged by a hard surface if they rest against something metal. Some of them didn't look like they would hold many rods with reels attached, and some looked cumbersome to remove the rods. Again, trying to clip the rods into a grommet that would wear out and waste my money. I'm not thinking of that right now, but this one overcomes all of that. It was easy to set up. Five minutes. I had a big smile on my face as I saw my rods and reels on it. It has a soft collar where the rods rest against it top and bottom, so it's not going to chip or mar the finish on my rods. The top and bottom holders can be adjusted with thumb screws to fit any type of rod or reel. There is no rod rack that will hold assembled rod and reel combo in every single slot. You can fit 12 rod and reel combo fully assembled on the rack. It can fit 24 rods without reels attached. If you're using low profile bait, you'll fit more than if you put spinning reels on there. You will fit less with big reels. The size of mine is 3000-4000. This covers what I need because I don't need others on this rack. If I need more storage, I'm buying a second or third rack. If you force it, the rack can rock side to side. It's still able to do the job, just giving you honest input. It is not rock solid, but it is not going to fall apart on you. You would have to fall on it to make it collapse. The construction is mostly painted or powder coated aluminum with some plastic hardware, big plastic thumb knobs to adjust the height of the upper and lower holders independently and plastic end caps and corner protectors. The base of your rods sit on aluminum, and there is a neoprene collar where the rods rest against it. It's really easy to pick up a rod from the rack and just set it back in. There was no fiddling with the clips. You can either pick up the rod or put it in the slot. This stand is one of the nicer stands. You don't have to click your rods in, you can just take them out with one hand. It takes no time at all to get it up and running. Some parts are already assembled and you won't need to read the rest of the instructions. This rack is very good. It's not the cheapest one out there, but it's definitely worth it.
The best gift for kids is a telescopic fishing net with rainbow color pattern mesh that is 888-282-0465, this is the best gift for kids because it is 888-282-0465, this is 888-282-0465 is 888-282-0465 is 888-282-0465 The robbery was organized. It holds up to 24 fishing rods and fishing reels. It is raining. The design is waterproof. You can put your rods on the rack. Easy assembly. Rustproof hardware and assembly instructions are included. All components and hardware are made in the USA. 25 year warranty Each rack is backed by a 25 year warranty. 25 year warranty Each rack is backed by a 25 year warranty.
👤The rod rack holds up to about 10- 12 saltwater rods, which are much larger than freshwater rods, due to the size of the reels. It is very sturdy and well made, and it looks beautiful in our home. We will be purchasing another one soon.
👤What I've been looking for! I took 5 minutes to put it together. You get all the hardware and a square bit for the screws. I am impressed. They should make one that holds more rods. If you like me and have a pole, you can use it on the boat, pier, surf, fresh, and saltwater. Definitely worth the money.
👤The garbage rod rack I bought was built like a tank and will last a lifetime. The product and delivery time was great.
👤I knew this would help my son because he has been taking up all parts of my garage with his fishing gear. He has filled it up. I need to buy him another one.
👤It's easy to put together. It was well made.
👤It's easy to hold my rods and it looks good.
👤Very good quality and easy to set up.
👤You can't fit 24 rods in it, but I love it. Unless you have reels. If it has a reel on it, I had to go to every other store for it. That is the only complaint I have. You have to have a drill to go together in 10 minutes.
👤There is a decent number of off-shore rods. It is not made from Starboard. It is expensive for what it is.
You can get one for your home, garage or cabin. The camo finish is great. There are rubber clips in place of the rods. Accommodates up to 6 rods. The components include top plate, bottom plate, rod clips, wood dowels, L brackets, short screws, and wall anchors.
👤I bought this product on the cheap and I don't recommend it. It works for holding your fishing rods, but is not very well made.
👤The slides will not fit. The price and appearance are good, but the fit-up is poor. Wrong screw head for metal brackets. Be prepared to take this guy to the work bench.
👤Looks great. It's easy to install.
👤One of the best investments I have made.
👤No way this will hold 6 rods and reels. Way to narrow.
👤It did the job with cheap print and material. I expected more.
👤The bottom rail is not strong. I suggest using different anchors to keep it from leaving the wall. The rails and poles are not supported by the brackets provided.
👤It's easy to fix gear out of the way.
👤I needed just what I needed for my ice shack and it got 4 stars. They sent out a new one right away.
👤El paquete vena daado, pero estaba buscando por eso lo regres.
There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children. Excellent gifts. Both strong and durable. There are 12 fishing rods in this picture. Best gifts for men and women are comfort and convenience. The high grade plastic is made for long life in the weather. One-piece construction is machine cut and forged. The foam padded edge is to prevent scratching on the rod. The seats are large enough to fit different size rods. The base grip holder takes the pressure off the blanks. It's easy to mount in horizontal or vertical. The measurement is 42 cm long. The interlocking design makes it easy to expand the rack. Qty: 2 pairs.
👤After 3 missed delivery dates, I had to look at other options. I know why the Dr. Fish ones had the best reviews. Simple, yet well built, takes up minimal space and install was a piece of cake. Excellent product!
👤Product works. They think you won't have reels on your rods because they are too close together and it's hard to fit them all in without skipping spots. These are pricey for what they are worth.
👤The rod holders are very small. Soft foam grips the rods. Very secure. The foam is very soft and there is no risk of damaging the rod. They don't do well with ice rods. These would hold anything you put into them. I have fly and saltwater rods. A good product.
👤The local Wood Craft store sells overpriced wall holders for my lathe tools. These work well for this purpose.
👤I ordered two of the racks and mounted them to store my rods. They were easy to mount. They fit perfectly to allow them to be screwed into the studs. If you want to remove the rod, you should grasp the rod at the top brackets and pull it out. If you want a high quality product, I would recommend this.
👤These are worth the extra money and are much better than the Berkley ones.
👤The wall unit is heavy and strong. The issue is that the rod positions may be too close together. I think this is true for all products of this nature.
👤The racks are large enough to hold my rods. I might have ordered the wrong size. If I push the rods into the tighter slot, they still work.
👤It's easy to install. The rods have a secure fit.
Fishing pole holders for garage vertical products from Rush Creek Creations. In this article about fishing pole holders for garage vertical you can see why people choose the product. Kastking and Mygift are also good brands to look for when you are finding fishing pole holders for garage vertical.
Rush Creek Creations, Kastking and Mygift are some of the best brands that chosen by people for fishing pole holders for garage vertical. Find the detail in this article. Old Cedar Outfitters, Goture and Wdwlbsm are also brands that their products are worth to check.