Best Fishing Pole Holders for Garage Wall Mount

Garage 10 Aug 2022 10+ Comments Open

1. Eecoo Fishing Vertical Install Keeps Organizer

Eecoo Fishing Vertical Install Keeps Organizer

The 16-inch wide rod rack is easy to setup and the base section secures the rod butt with its foam grips, which can open to 0.35” to securely hold your rod blanks. Each rod rack has all the mounting hardware included. The fishing rod rack is made of high quality material and light weight. There are multiple holes in a shelf that can hold many fishing rods. There is a way to store fishing rods. Each set of two rods can be mounted on the wall. It is easy to install. It is 1.26 inches wide. The assembly process is easy and the floor space is small. The size is 33 x 3.2 cm and 13 x 1.26 inches. The surrounding holes are used to fix the rod, and the semi-closed hole is used to fix the tip of the rod. The poles are placed vertically on the wall of the garage or workshop and are ready for use. The best gift is a boat truss, it's perfect for protecting and organizing your fishing rod collection. There is no need for additional tools. This is a great gift for fishermen. The pole holders and mounts are included in the kit. If you are not completely satisfied with the quality of the product, they will give you a 100% refund within 30 days after purchase. They offer the best customer service.

Brand: Eecoo

👤A simple design holds a wide variety of rod sizes. It seems like rubber is strong and won't wear out soon.

👤Not what I thought I was getting. There was no instructions or hardware.

👤Garbage. Don't buy. I was excited to get them. I am disappointed. The package was old and dusty. 2. Not white as advertised. It is a yellow-almond color and reminds me of nicotine stained white. 3. The plastic is very weak and flexible. The middle bowed out when using the two screw holes. I will have to make the center more secure. 4. The black rubber part that holds the rods is useless without descent support. I purchased two sets. I threw the packaging away because I haven't returned them. Spend your hard earned money somewhere else.

2. Wdwlbsm Fishing Horizontal Storage Basement

Wdwlbsm Fishing Horizontal Storage Basement

Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" The rod rest is designed with deep grooves to allow it to rest peacefully in place. The distance between the two racks should be adjusted to accommodate your fishing rods length. The rod rack can be mounted on the wall or ceiling to hold fishing rods, ski poles, hiking poles, cue and hockey sticks. It's a great pole holder for your garage, shed, or other storage area. The ceiling fishing rod storage rack holder is made of heavy duty steel and is more sturdy. It can hold up to 8 rods and reel combo. Black powder coated finished can provide maximum protection, prevent the fishing rod from corroding, used for long time. It is easy to install the mounting hardware included. It is easy to install the mounting hardware included.

Brand: Wdwlbsm

👤The butt end of the fishing rod and the female end of a two piece rod need to be accommodated by this item.

👤Heavy duty metal for storing fishing rods. works great!

👤I knew I wouldn't be able to get every rod next to each other. I had three sets of mounts for most of them. One more set should do the trick.

3. Calamus Vertical Fishing Holder Garage,Vertical

Calamus Vertical Fishing Holder Garage%EF%BC%8CVertical

The rack built by wood is less durable than the ones built with the ABS + EVA material. You can store up to 6 Rods. The Calamus fishing pole holder can hold six individual rods in less than 14 inches of wall space. It's perfect for keeping your reels and rods in place. Depending on your needs, you can adjust the distance between the two rod racks. Simple installation. It is easy to install and light weight. To install the rod rack, you need to determine the location of the rod rack, level it, mark the mounting holes, drill and install the anchors, and tighten the screws with a screwdriver. Interlocking System The interlocking design makes it easy to extend more than one rod rack. Two pairs are a better choice if you have many fishing rods. The Calamus fishing pole rack is made of durable foam grip pads that are designed to hold the poles safely and protect your rods from scratches. One size fits better. The rod's diameter is 0.28''-0.4''. The vertical fishing rod holder has a base that prevents rods from sliding down. There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children. There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children.

Brand: Calamus

👤I bought 3 sets of these for my husband. I think it cost me $65. I looked at many different types and this was the one that had the best reviews. The Eva foam is used to hold the poles. This is a great way to get all of our poles up off the floor. They used to lean against the wall. This gave my Husband a lot of space back in his shed, which is nice and neat. I would definitely recommend them.

👤If you have baitcasters on the rods, you will have to skip a holder to fit them properly, so be aware that these are good rod holders. They will push on each other if not.

👤These are not the best rod holder, but they work. The foam is stiff enough to hold the rods but not sure how long it will last. You can use them as two individual units if you slide them together. This is a good deal for the money.

👤It's easy to get to each rod when I go fishing with this thing, it looks good with all of the rods on it. It was easy to install, just a couple of screws. It's easy to use, just put the base of the rod in the base and snap the upper part of the rod in the top section.

👤I put them inside my dock box. I used heavy duty Velcro. It worked out well.

👤I use these holders to hold my golf clubs.

👤They seem to have a tight grip on the pole. I will be happy if it stays that way. I put it in my baggage compartment. Thin walls make it difficult to tell what is on the other side.

👤This product was the perfect way to get those rods out of the corner. Several rods were damaged when I stood them in the corner. The rod holder solved my problem.

4. Berkley Black Horizontal Rod Rack

Berkley Black Horizontal Rod Rack

The size of theRACK is sufficient for a premium storage solution for your fishing gear. 6 rods are neatly and securely stored. The disk drag system is powered by the disk. It is durable and lightweight. There are 6 rods neatly and securely stored.

Brand: Berkley

👤It's fine for the money. However,... 1. The thick part of the rod closer to the reel is hard to get in and out of because of the stiff foam. 2. Even when staggered and using every other slot, the reels clash because of the spacing. I was able to fit six rods by pointing them in different directions, but the reels don't have enough room. I have a horizontal mount on the wall. The screws are a joke. I didn't try them because they're so short. I don't think they'd hold. It works, but I was hoping for a more elegant solution from Berkley. I saw a video on the internet that suggested cutting the pool noodle in half, and I think that would have worked better.

👤I rested the butt of the rods on the floor in one section. I was able to put 24 rods using this method. I had to use wall anchors on some of them. I am very happy with the purchase.

👤The foam is cheap. I can tell by taking the poles in an out many times that they will wear out quickly. Despite the quality of the foam, I am happy with it for storage. I used command picture hanging strips because my landlord doesn't like screw/nail holes in the wall. It works perfectly. The holders are of good quality. The plastic shell is very strong. They will be strong if mounted on the wall. The horizontal mount is a better choice than the vertical one. You can choose to mount horizontal or vertical with the horizontal mount. I used the horizontal mounts to double my storage capacity and just left the bottom of the rod on the floor. I will purchase these again when they wear out.

👤The rod holder is just as good as you would find in China or Pakistan. I'm giving a one star rating because these rod holders are shipped with dirt cheap flatblade screws, which is incredibly frustrating when trying to mount them. It would have been better if they had includedPhillips or square. You should bring your own screws.

👤Not for the intended purpose for rods, but for a handgun safe. This was one option that I had seen used on gun forums. Others used a dish rack that didn't seem to hold as many handguns or guns that were upside down. These are perfect for the typical sized semi- auto 9mm-.45 caliber handguns. There is more room to deal with and they lean more because of their thinner barrel. This is an economical and efficient way to organize. 13 handguns can be stored in the center of the safe between them.

👤I think it's a decent rod holder. There are a few concerns I have. Any rod thicker than an average light-weight or mid-weight fresh water rod will be a very tight fit, and might not fit at all. My fishing rod won't fit. The included screws are not easy to use. They are flatheads, not philips heads. The screws are harder to install. Even though I screwed directly into the wall studs, they didn't grip very well because they are too short. They only grabbed the wood after accounting for the thickness of the wallboard. Use longer wood screws.

5. Rush Creek Creations Fishing American

Rush Creek Creations Fishing American

There areDEAL gifts. 6 fishing rods are neatly and securely stored in the Rod Storage Organizer. Best gifts for men and women. The garage or wall is a ceiling fan. The rod holder allows you to store 11 rod and reel combo in a variety of positions on the wall or ceiling. Rods are not included. TILE INSTALLATION You can put your fishing rod and reel combo in your garage, shed, or other storage area. The innovative design allows for the rod to hold securely in place by adjusting the spacing from the bottom and top pieces. Easy assembly. You can spend less time on assembling and more time out on the water with assembly. The size of theRACK is sufficient for a premium storage solution for your fishing gear.

Brand: Rush Creek Creations

👤Don't get it wet, it's laminated particle board. It doesn't look bad, but it's not as nice as in the pictures. I bought two sets of rods to hang. I could have built nicer ones if I had waited a bit longer to get them. They put a sticker on the product that was nearly impossible to remove and had to use alcohol to remove it. I would give it 4 stars, but it took about an hour to get that sticker off each one. The screws that came with the kit looked cheap, so I used my own.

👤I knew these were made of laminated particle board, but I had to make my own because it would have cost me more and taken a lot more time. I am glad I bought these. It only took a few minutes to install 2 sets of these on my garage ceiling. If you don't do pullups on them, these will last a long time. I used the screws that were included. If I get more fishing rods, I will buy another set.

👤I bought a similar rod holder for my son, and wanted to get one for myself. I saw this one, and it was very similar. It's a piece of garbage. It's flimsy, covered with thin laminate, and it's terrible. I was installing it when it broke. I don't want my money back. I want to remember the lesson.

👤If you're thinking about getting a rod rack for holding any fishing rods other than a child's Batman or Wonder Woman rod and reel, I would highly recommend you pass on this rod rack. The pressed particle board that is used to make these racks is not the right size to hold anything close to an offshore rod. I tried to post pictures of the cracks in my rack before I put a rod on it. There are pictures of the cracks. There is no way to post pics for this product's review.

👤I had to wait a few weeks to get the insulation pieces from the company. It was difficult to get out of the old screw that was stuck in the holes when I tried to install it, it must have been a return purchase or pre-used because it was stuck in the holes. The wood looks really cheap. I had a hard time getting the anchors to hold in my wall, they kept spinning and it was a nightmare. Do not buy this product.

👤I thought it was a great idea for under 20 bucks, but when it arrived in the mail, it was very flimsy. I don't think the stuff is made out of MDF either way, I should have gotten a piece of three-quarter inch plywood a holesaw and done this myself, which is what I had to do after trying to install this piece of garbage and snapping it in my hands.

👤Simple design, and probably not hard for someone with wood working tools to make themselves. I recommend this product for those of us who don't have the time or tools to make a rack. I mounted this to the ceiling, using dead space. I finally got my fishing gear out of the corner of the garage, thanks to the great quality. I found my measurement to be slightly less than the installation guide suggests, so make sure to put a measuring tape to it before drilling your holes.

6. Fishing Rod Wall Rack Weatherproof

Fishing Rod Wall Rack Weatherproof

The microfiber steering wheel cover with Silicone hand grip is a must have for any fisherman. Premium materials keep hands warm. It fits 15. The steering wheels are 5. Store, organize and stores fishing rods. Wealers rod rack will save you space, holds at least 3 rods, and you can add more to expand the capacity. It's easy to use and you can access your rods and sticks. Rods are out of reach of children and fixes securely on the wall. It's great for storing fishing poles on a boat, truck, or garage.

Brand: Wealers

👤I was satisfied with my choice after looking at several options. I don't have a garage or shed to store our fishing rods so I wanted something to install in a bedroom or office to keep them out of the way when not in use. The way this rack is arranged helps use less space but the wide racks are easy to put the rods in and get them out. I put them high up on the wall so they can be put in and out without problems. We only have freshwater reels, so it may be more difficult to use any of the racks with larger saltwater reels. They are black and plastic, not stylish, but they get the job done well without any clips or parts breaking.

👤I used dead space above a set of doors to hang my rods in the closet. The hole for the screw is too close to the top hook, so the plastic where the top screw is located should be longer. The top level hook was in the way of the keyless chuck and I couldn't use my screwdriver. 15 hard minutes with a manual screwdriver is what it took to install what should have taken five minutes.

👤I use Sturdy easy to install rod holds for some of my poles. My crappie poles are separated from my base fishing poles. I put them high on the wall so that I have more room for my other fishing items on the wall.

👤We needed something to hang the fishing rods from the wall. These worked out great for our fishing and surf rods. We were not sure if they would hold the weight of the surf rods.

👤I used zip ties and no screws after reading that the top hole was close to the top hook. I like how light it is. I had to stagger my rods because of my offshore reels. I recommend!

👤The plastic fishing rod holder does what it's supposed to do. It gets the rods off the floor and has held up well so far. The mounting hardware was not the best. If you're looking for something simple, quick, and inexpensive, you can't beat this.

👤It works well for our fishing rods. I mounted high on the wall with the help of the screws and lugs. A thick plastic construction.

👤The design of the store is nice and clean. They are more convenient to store and retrieve. Before and after use, no longer need to move the car or use the ladder.

7. PETIT MANON Vertical Fishing Holder

PETIT MANON Vertical Fishing Holder

Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" Fishing rob storage The wall fishing rack can hold up to 6 rods and reels. Solid natural wood has high density and is very durable. The vertical rod holder has 4 mounting holes, no need to punch holes in the fishing storage rack body. The spacing from the bottom and top piece should be adjusted according to the length of the rod. The base plate rod butt holders are 3 cm in diameter and are suitable for most fishing rods. The butt holders keep your fishing rod stable. A beautiful monument. The fishing pole holder is vintage and can be used in your home decor. It's perfect for indoor or outdoor storage areas. A beautiful monument. The fishing pole holder is vintage and can be used in your home decor. It's perfect for indoor or outdoor storage areas.

Brand: Petit Manon

👤I bought this as a fathers day gift and it was a hit. The fishing poles fit in it perfectly. The unit is very well made and we love it. We decided to hang it in our stairway and use the fishing rods and reals as art.

👤I liked all of the appearances. They need to improve how they mount.

8. CITTURA Fishing Storage Plastic 1pair Black

CITTURA Fishing Storage Plastic 1pair Black

We have a 100% SATISFACTION GUARANTEE. They are so confident in their products that they are guaranteeing a money back guarantee. They will try their best to satisfy every customer, so please let them know if you have any questions. Powerful story. There are six fishing rods or combinations that can be placed. Reliable material. The vertical fishing rod holder has a durable base that can sustain the pressure from the fishing rod and the rod reel easily, and the rack is made with foam grip pads to protect the fishing rod from scratches. Installation is easy. Installation screws and plastic dowels are supplied for use in the installation process. The standards of civility. It looks great when mounted on the wall. Such as a garage, storage room, etc. The rack built by wood is less durable than the ones built with the ABS + EVA material. The rack built by wood is less durable than the ones built with the ABS + EVA material.

Brand: Cittura

👤I liked how easy it was.

9. Rush Creek Creations Fishing Capacity

Rush Creek Creations Fishing Capacity

The size of theRACK is 23.19 inches. L x 2.56′′ W x 0.259′′ H is a premium storage solution for your fishing gear. A multi-purpose fishing pole storage system has 2 rod clips. The dual rod clip technology allows 2 freshwater rods or one saltwater rod. Four utility boxes are not included. There are padded slots on the base plate for rod handles. The rack is 22.83"L x 14.37"W x 23.74"H.

Brand: Rush Creek Creations

👤This is too short. The reels are the same height as the top rod clips, so it doesn't fit my saltwater rods. My micro rods are too thin and slip out of the rubber rod clips. The rubber rod clips are designed poorly, it is easier to pull the rods out than to put them in. I have to use two hands to put them in the clips and I only need one to pull them out, I would rather it be the other way around. The rod holder positions are too close together. I pull one rod off the rack and it pulls one of the rods next to it out of the rubber clip. If the clips held better, that might not be a problem. The rack is not as solid as it should be. It has good stability. It is questionable. I mean when I rock it backwards and forwards. It makes cracking noises when I do the same thing. It should have at least 6 bolts in the bottom and one more permanent shelf. The pieces that take the #8 screws should have been at the bottom.

👤I was impressed by the weight of the package, which usually points to a degree of sturdiness. Things went downhill from there. One could see that it was not cut straight. The rubber rod holders were not completely detached. The American company who "test and design" the products they market and sell don't monitor quality control was the first thing that came to my mind. I would send it back if it wasn't so hard to disassemble and repackage.

👤I was looking for a rod rack that would hold all my fishing gear. I was a bit skeptical when I found this because it didn't have any reviews. I'm glad I made the purchase. It is very easy to put together. You may need a drill for the screws. This product is amazing.

👤ZERO STARS is not an option and that's why I gave this product a 1 star. The vinyl surface was damaged in several places and buggered around one corner. The plastic edge strip was unglued. The rod clips are stiff and cheap. I will have to replace them with rubber clips. This is junk.

👤I've been looking for something similar in terms of rod/tackle storage. I put everything together in less than 10 minutes. There are a few screws that hold everything in place, and you need an Allen wrench to install the feet. The rack is too short to hold saltwater rods and the butt is too thick to fit in the rubber clips. It could be built a little more solid. I had to nail the rubber clips back in after one of them fell out. I am happy with the purchase. This product will last a long time for this weekend warrior.

👤I bought this rod because my other one that I was storing in my garage snapped in half one day when I reached over it to get something I spent around the same price on that rod rack as I did this one, and the differences are night and day. This product is so sturdy that it is easy to assemble just sliding panels in place and put the feet on with two Allen key screws, and it is also as good as a rock in the desert.

10. Booms Fishing Vertical Holder Modular

Booms Fishing Vertical Holder Modular

StoreYourBoard in Virginia designed and engineered the patent Ponzi design. The 13.6” width fishing rod storage rack holds up to 6 fishing rods and reel combo vertically to save space. It's better to change the reel to fit the rod differently. Straight lineup is not allowed due to reel width. It's good to keep your rods organized. The rod racks have an interlocking system that makes it easy to expand and store. The rod holder is easy to install and comes with 6 screws. It's possible to put it into a wall and put your rod rack gear on the wall in less than 5 minutes. The fishing poles are protected from being scratched or damaged with the rod rack. Your fishing poles should be new. The rod diameter is 0.2"-0.4". There is a measurement of 5mm-11mm. The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks. The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks.

Brand: Booms Fishing

👤I was excited for these to come in and organize my collection. The foam in the photos does not look like it did when I put my rods in. The foam in the photos looks very close to what I received. I put the top piece below the first eyelets on the rods so that the rod is thicker where the foam hits, and the rods still fall out because the foam is not supportive. I was able to pull the foam out on one side to help hold the rods in, but I wish it would have worked on its own.

👤We fish a lot. There are over 70 rods that were always stacked against corners. We had to go through several stacks before finding the rods we needed, and we were always looking for specific rods. I wanted to see how we liked them. We now have 10 total and love them all! I put them up myself because it was easy to install. I ordered a size that fit all of the rods.

👤I like these. I got the wider version so there is more space between the rods. I can't imagine getting the narrower ones. The wider one would fit rods and reels.

👤It was shortened to make it easier to ship from overseas. The product is made of plastic and foam. The holes are 13 inches apart. Adding an additional strip of wood is not a solution for wall anchoring. I wanted a solution that didn't require me to go to the home store to pick up more supplies. Our friends overseas have a bust. USA studs are on the center.

👤It seems nice. They may have changed the design because of the reviews complaining about loose foam. It was too tight for the kids to use. If you want to drill straight into your studs, you should use a 16" version.

👤My husband's fishing rods weren't leaning on things in the garage. He likes to open the garage door and see the rods on the wall. It was easy to install and a great surprise for him.

👤There is a problem with the small plastic mounting tabs. The plastic tabs will crack if you tighten the screws too much. They are not large enough to last. I am a mechanical engineer and the tabs should have been larger, made out of a more durable material or have metal sleeves on the back. I helped the seller design a better product. There are two mounting tabs on one side and one on the other side. I think I will be replacing the unit soon.

👤Like this product. Does as advertised. If you try and store 5 rods with all reels attached, you'll have to change the rotation of each one. Straight lineup is not allowed due to reel width.

11. Berkley BAVRR Vertical Rack Black

Berkley BAVRR Vertical Rack Black

The rod rack can hold up to 6 rods. The foam grip pads hold rods securely. A lightweight plastic design. It is a long lasting proof of corrosion. 6 rods are neatly and securely stored.

Brand: Berkley

👤Two people need to be hit. 1. The person decided which screws to include. The person agreed. The rack is great but the screws are terrible. They are flat head. Is it a flat head? Who uses flat heads now? There was a terrible decision. They're only about the same length. The mount point is thick. You know what it is? Hmm? You are correct. The screws don't reach the studs in the wall. Do you see the issue? Pulling out the rods from the brackets. How long do you think it will take for the rack to fall off the wall and the expensive rods to fall to the ground? Okay. Maybe it's not that hard. You know what I'm talking about. Not sure about you. I wouldn't trust these tiny screws in the wall to hold my rods and reels, they are 16" apart, and no drywall anchor is included. Most framed walls allow you to mount. The screws are long enough. rant over. The screws were replaced with 1-1/4" drywall screws. I'm not worried about the rods falling off the wall because they are now organized and off the ground. If anyone from Berkley is reading this. The wall mount rack is very good. Still. I mentioned those two people before.

👤It was perfect. What I was looking for. There is vertical support for 6 reeds. The plastic material has a good finish. I have used it for 4 spinning rods with their 3000 and 4000 reels. Pros. The material is resistant. It can be mounted for different lengths of rods. The base in the vertical kit has front support so it can be mounted horizontally and still hold the fishing rods. The upper support has high density foam. There are screws for wall mounting. There are Cons. The screws are good for wood, drilled brick or concrete, but not for plasterboard walls. SPANISH review perfecto. Justo, buscaba. Para 6 caas, soporte vertical. Material plastico de gran resistencia. He has a problema con 4 caas de spinning, 1 x 7'0'' medium light, 1 x 7'0'' medium heavy, and 2 x 8'0'' medium heavy. Pros. Material resistente. Puede para caas. En el kit horizontal, la base tiene soporte frontal. Espuma de alta densidad. Incluye tornillos para montar. There are Cons. Los tornillos estn para madera, ladrillo o cemento previamente taladrado.

👤These were easy to install and work well. I worry that the hard molded foam will not hold up over time, but I am careful as I put the rods in and out. The TWSS. It is easy to install and do the job. I don't have a picture of it in use, but I have a great picture of all my girls fishing, so you can see why I need to be able to store multiple fishing rods. There is a better picture.

👤I bought this because it was cheaper than the Rapala rod holders. It is cheaper in every sense of the word. The foam is hard to navigate. I ordered another Rapala rod holder and recommend you do the same, as the far right holder shows the foam missing where it fell out.


What is the best product for fishing pole holders for garage wall mount?

Fishing pole holders for garage wall mount products from Eecoo. In this article about fishing pole holders for garage wall mount you can see why people choose the product. Wdwlbsm and Calamus are also good brands to look for when you are finding fishing pole holders for garage wall mount.

What are the best brands for fishing pole holders for garage wall mount?

Eecoo, Wdwlbsm and Calamus are some of the best brands that chosen by people for fishing pole holders for garage wall mount. Find the detail in this article. Berkley, Rush Creek Creations and Wealers are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to