The sport is called billiards. The dimensions are 2.4 in. L x 16.9 in. You can store your fishing rods on the wall orceiling. The fishing rod can be corroded by the high-impact STEEL fishing rod storage racks. It can hold up to 8 fishing rods and reel combo. This handy organizer can be used to maximize space and eliminate garage roomcluttering. Convenient storage can be created by utilizing extra space in the garage, cabin, and boat rooms. Keeping the space neat and organized. Heavy duty steel is coated with a substance called polyvinylchloride. Protect your fishing rods from damage. It is easy to put it together. Hardware is included. You can organize your rod and reel combo in a garage or workshop. There is a US patent pending. All rights are reserved.
👤The picture supplied is not the true size. This is very small. Look at the product dimensions to see the length. That's over a foot. The image makes you think it's several feet long, but it isn't. Unless you use it for small fresh water rods, your stuff isn't going to fit. The construction is very sturdy with a coating that won't scratch or damage what you put in it. That's the positive side. This is a lot of money for a tiny item. It would have gotten 5 stars if it was twice the current size.
👤These are nice. They think they will last a long time. The coating on them is good. I did not give them five stars because the openings could be a little bigger. The bases of some of the bigger rods did not fit. It fit most of my rods. The openings are crammed so it's like a puzzle to place the rods and reels. After a few minutes, I was able to get them all to fall down. I would recommend putting your most frequently used rods last, as they are the easiest to pull off.
👤The rack is very small and easy to install on the ceiling. This rack is perfect for small rods. The butt of the heavy rod will go through the hole. I can't put the second piece into the rack. It works if I place it through the larger guide. If the rack is full, the reels will get stuck on the other rods when trying to get the rod out. If the spacing was just an inch more it would be better. All in a good place. I would only purchase my smaller rods again.
👤The first picture of the rack shows two different wall brackets, but as you scroll through the other pictures you will see the actual design of the rack, which gives you two If you mount the product as shown in the picture, each rod will get 2 open ends, no big deal, or 2 closed ends. What a PIA that would be! Okay. If you try to make it offset like what you saw in the first picture, you will hit another problem. You lose the function of the open hook when you flip it. I was looking forward to hanging these up since I was locked in this house. Will be looking for a new option to send these back.
👤The # was the perfect amount for me because I only own a few rods. It went up on my ceiling without a hitch. The holes fit my deep sea rods perfectly, and they were easy to get into or out of. The spacing could be 1/2 to 1inch wider each. My big reels are bumping into each other, but they don't affect the stability or damage the rods. I'll go for 4 stars since I can't do half a star. They were slightly bowed, but that did not affect alignment. I don't have to worry about choosing a wood/particle board based product breaking on me because it met expectations. If you have large reels for deep sea, be aware of the length before purchasing. I would suggest mixing reel sizes. Still recommend.
There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children. SPACE SAVER 2-in-1 rack can be mounted on wall or ceiling to store your fishing rods, provides you with simplified and hassle free storage. It's great for storing fishing rods, hiking poles, ski poles, hockey sticks and cue. The fishing rod storage rack is made of heavy duty steel, which makes it more sturdy. It can hold up to 8 rod and reel combinations. The distance between the bottom and the top can be adjusted to accommodate the fishing rods length. Place the rods stable with the design. Black powder coated, which provide maximum protection, prevent from corrosion and scratch. It can be used for a long time. It's easy to install. There are no special skills required to mount a fishing rod rack. Installation is easy with the mounting hardware included. Fishing Rods are not included. It's easy to install. There are no special skills required to mount a fishing rod rack. Installation is easy with the mounting hardware included. Fishing Rods are not included.
👤He put them in the garage. It's easy to get there, out of the way. The rods were being knocked together by falling over. Now that his babies are protected, he will be happy. I think everyone who hates to see rods thrown in a corner is worth the money because I know you do it. There is a lot of room with our garage door openers. Just stop reading and buy them, you know you want them too. No more excuses. I am done now but they really work well.
👤I should have bought this a long time ago. It's a great space saver. I only have 7 rod/reel combinations, so this one is perfect for me. When I needed something out of the corner, I was shuffling my fishing poles around. I leaned into a corner. Highly recommended!
👤I went to put this up and thought about where it would fit best. I tried it on my beach rods and it had openings for fly rods or small bait casting rods. My beach rods wouldn't fit in the openings. Nice idea but needs to be refined by actual users.
👤I had to get this product for myself because I liked it so much. The fishing pole storage was very artistic. He could keep his poles in a safe place.
👤If you hang them from the ceiling, they will work. Unless your rods have reels attached, the openings are too close for wall mount.
👤Grandson loves having his poles organized.
👤It's perfect for hanging fishing rods. Shipping was fast. Product was described.
👤Large poles did not fit but they were great.
The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks. The garage or wall is a ceiling fan. The rod holder can hold up to 8 rods and reel combo. TILE INSTALLATION You can put your fishing rod and reel combo in your garage, shed, or other storage area. The innovative design allows for the rod to hold securely in place by adjusting the spacing from the bottom and top pieces. Easy assembly. You can spend less time on assembling and more time out on the water with assembly. The size of theRACK is 23.19 inches. L x 2.56′′ W x 0.259′′ H is a premium storage solution for your fishing gear.
👤The screws are long enough to get through the wall but not long enough to bite into the stud. No problem, I will just use common screws. Standard screws will not fit inside the holes because the heads on their screws are smaller. I have to either bore out the holes in the rack or go to the hardware store to get the right screws for the product. A job that should have taken five minutes is now 45 minutes. I need to purchase more parts. Thanks a lot.
👤Product is acceptable for price. It's not made out of solid wood, and be careful if you use a drill to put it into a wall, as the drill bits split the wood very easily. Good product. Four stars for the manufacture of particle board.
👤"It does the job" is not a good review. It's made in China from the cheapest materials. You will damage it if you don't install it carefully. I didn't even attempt to install because I was so disgusted with the quality. Corporate America makes a buck off of cheap Chinese labor and material. You should buy a 1x4 and hang it on the wall. It would cost less and be better quality.
👤Garbage. It's not even wood. The mine cracked. When you tighten the screws, the wall anchors spin in the wall. I took it out of the box and it was cheap. This is disgusting. Harbor Freight has better products. Returning. Don't waste your money. Something made of plastic is what you should look for.
👤It is cheap and I am worried about the humidity in the garage. The wall anchors they sent did not work. I tried to turn the screw into them, but they kept pushing. I had to buy more. I don't think I got my money's worth.
👤The junk is pressed cardboard and has a cherry veneer sticker on it. It was split apart when I put the screws in. Get one that is plastic or wood.
👤The pre-drilled holes are not perfect. I didn't drill out the right hole for the screws. I had to blow out the particle board in order to remove it from the ceiling because my bit got stuck. It looked decent, but it was going in the trash.
👤Attach to wall or ceiling with no assembly required. Solid wood, but that was expected. The product is better suited to overhead mounting as reels tend to get in the way of the rod below. This works to organize and store your gear, but may be less practical for a daily use scenario if used to store rods vertically on the wall. I got what I paid for, and I'm happy about it. A little more spacing between the holders would make this more user friendly.
👤Not up yet. Looks right. Excellent!
👤It was quick for overseas delivery. Couldn't find anything else that fit my needs.
👤This was what I was expecting. I had to cut them down where I wanted to put them. They look great and do what I want.
Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" Fishing rob storage The wall fishing rack can hold up to 6 rods and reels. Solid natural wood has high density and is very durable. The vertical rod holder has 4 mounting holes, no need to punch holes in the fishing storage rack body. The spacing from the bottom and top piece should be adjusted according to the length of the rod. The base plate rod butt holders are 3 cm in diameter and are suitable for most fishing rods. The butt holders keep your fishing rod stable. A beautiful monument. The fishing pole holder is vintage and can be used in your home decor. It's perfect for indoor or outdoor storage areas. A beautiful monument. The fishing pole holder is vintage and can be used in your home decor. It's perfect for indoor or outdoor storage areas.
👤I bought this as a fathers day gift and it was a hit. The fishing poles fit in it perfectly. The unit is very well made and we love it. We decided to hang it in our stairway and use the fishing rods and reals as art.
👤I liked all of the appearances. They need to improve how they mount.
SPECIFICATIONS: The T5 Multiloader is 18 feet long and 11 feet wide. It can hold up to 11 fishing rods or rod and reel combinations. The camo finish is great. It's ideal for walls, ceilings or rafters. Use either way. It's a hybrid between their vertical wall rack, horizontal wall rack and ceiling rack. The fishing rod holder is easy to assemble.
👤If you are a bass fisherman, this is for you. If you're a saltwater fisherman, you should get a bigger holder. I do both. All of my smaller rods fit, but anything I would use in salt, even the smaller stuff, doesn't fit. If you spread them apart, the rod would be an awful lot smaller. It was easy to mount and it looks good. It was mounted to the wall or ceiling with the necessary hardware. I'm happy with it, but I wish it was a bit bigger so it could hold my catfish rods.
👤Not bad. Light pine. stained I could not make my own. One set holds rods. I have spinners and bait. There are ice rods and kids poles. The ceiling of my trailer was screwed into. The screws are not tight. Better anchors or longer scews? It was tight enough to hold the rods. It was shorter than expected. In. It was long. There are 1.5 holes in the round. The pole fit. 2.5 in. It was wide. 75 in thick. The tip is about 1 in wide. The brackets are from the factory. It's not a bad deal to get my rods off the floor. I would make my own for 10 bucks, but I don't have the time. I bought two sets for 40 bucks. Done. This is very light china pine wood. If you drill larger holes, the wood may crack out. Use caution. The lenth of the wood is run by grain. If air born, china stain is probable cancer. These work well for me. The flyrods are held in the tip holes in the second set. The short poles are hanging out the handle holes and I am ordering another set for the short stuff.
👤The pieces are in the garbage. Before the first screw was put in, this broke. The screw that split the wood was sent sideways by the poorly drilled holes, and the whole corner snapped off when I tried to remove it. I lost my grip and it broke in half. This is Gamble and it is right where it is. $17 wasted. You have been defeated. Buy at your own risk.
👤I own two of these mounts. The first one arrived in perfect condition. I mounted it directly to the floor joists on the ceiling of my basement, using the 2 screw mount holes on either side. The screws alone into the joists will hold a lot of weight and didn't bother with the brackets. I ordered a second mount a couple months later and it was broken when I received it, but it was the same mount that arrived via theUPS. The mount will likely be stronger than the original product because I used a metal Simpson strong tie andGorilla Glue to repair it. I decided to just glue it, attach a strong-tie, and mount it on the ceiling joist, instead of setting up a return through Amazon. It's simple and works perfectly fine for storing up to 11 fishing rods, but it's weak and fragile during shipping, so it's probably not worth a 5-star rating. It's easy to work with but break easily so be careful when mounting this to a wall or ceiling.
The rack built by wood is less durable than the ones built with the ABS + EVA material. You can store up to 6 Rods. The Calamus fishing pole holder can hold six individual rods in less than 14 inches of wall space. It's perfect for keeping your reels and rods in place. Depending on your needs, you can adjust the distance between the two rod racks. Simple installation. It is easy to install and light weight. To install the rod rack, you need to determine the location of the rod rack, level it, mark the mounting holes, drill and install the anchors, and tighten the screws with a screwdriver. Interlocking System The interlocking design makes it easy to extend more than one rod rack. Two pairs are a better choice if you have many fishing rods. The Calamus fishing pole rack is made of durable foam grip pads that are designed to hold the poles safely and protect your rods from scratches. One size fits better. The rod's diameter is 0.28''-0.4''. The vertical fishing rod holder has a base that prevents rods from sliding down. There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children. There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children.
👤I bought 3 sets of these for my husband. I think it cost me $65. I looked at many different types and this was the one that had the best reviews. The Eva foam is used to hold the poles. This is a great way to get all of our poles up off the floor. They used to lean against the wall. This gave my Husband a lot of space back in his shed, which is nice and neat. I would definitely recommend them.
👤If you have baitcasters on the rods, you will have to skip a holder to fit them properly, so be aware that these are good rod holders. They will push on each other if not.
👤These are not the best rod holder, but they work. The foam is stiff enough to hold the rods but not sure how long it will last. You can use them as two individual units if you slide them together. This is a good deal for the money.
👤It's easy to get to each rod when I go fishing with this thing, it looks good with all of the rods on it. It was easy to install, just a couple of screws. It's easy to use, just put the base of the rod in the base and snap the upper part of the rod in the top section.
👤I put them inside my dock box. I used heavy duty Velcro. It worked out well.
👤I use these holders to hold my golf clubs.
👤They seem to have a tight grip on the pole. I will be happy if it stays that way. I put it in my baggage compartment. Thin walls make it difficult to tell what is on the other side.
👤This product was the perfect way to get those rods out of the corner. Several rods were damaged when I stood them in the corner. The rod holder solved my problem.
Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" The rod rest is designed with deep grooves to allow it to rest peacefully in place. The distance between the two racks should be adjusted to accommodate your fishing rods length. The rod rack can be mounted on the wall or ceiling to hold fishing rods, ski poles, hiking poles, cue and hockey sticks. It's a great pole holder for your garage, shed, or other storage area. The ceiling fishing rod storage rack holder is made of heavy duty steel and is more sturdy. It can hold up to 8 rods and reel combo. Black powder coated finished can provide maximum protection, prevent the fishing rod from corroding, used for long time. It is easy to install the mounting hardware included. It is easy to install the mounting hardware included.
👤The butt end of the fishing rod and the female end of a two piece rod need to be accommodated by this item.
👤Heavy duty metal for storing fishing rods. works great!
👤I knew I wouldn't be able to get every rod next to each other. I had three sets of mounts for most of them. One more set should do the trick.
It's easy to assemble fishing rods on a boat, truck, home or garage, even in your bedroom, without the hassle of putting it together. There are no tools required. A great gift for the fishermen. The bass fish themed design has a distressed look. It can hold up to 6 rods. There are clips for perfect fit and alignment. All hardware is included. Stores all types of fishing rods. The upper and lower rack is 23.62"L x 1.95"W x 9.65"H. 21.26"L x 3.15"W x 2.3"H
👤She is short on function but she looks great. The clips for the rod holder are held in by the track. The holders can slide out of the track without a cap or retainer. The holders are on the track. I only use this for ice fishing jigging rods. I come into the room to find the rods have popped out of the holding clips, or the clips have slid out of the track. These are not heavy rods.
👤I want to like it. Great idea. I wish it was made of real wood and not the crappy laminated particle board that came with it. I bought this as a Christmas present. I wish it was packed in a good box and not thrown in a bad box.
👤I assumed the product was made of cedar because it was listed as wood. It is cheap and covered with a fake wood veneer. If this was going to be installed indoors with air conditioning, maybe it is fine, but I was specifically looking for something to mount in the carport of our lake house. It gets very humid and the MDF wouldn't last long. Looks cute. It is more of the same cheap, misleading garbage that has flooded Amazon recently.
👤Not worth $33. They are covered with paper. I bought two different ones. One has a track with a bead and the other is not. The track broke because it was tight. The other is to loose and the rods will slide over. The paper was torn with the installation. Don't waste your money.
👤This was a pleasant surprise. The wood pieces had a beautiful finish. It was installed with the help of wall anchors. A display for vintage fishing rods. Highly recommended.
👤I had to drill into the concrete and it was hard to handle with the small holes in the back. If you go into anything other than wood or drywall, make sure you have the right screw head size. There are wood screws.
👤I ordered the regular and jumping bass so I could mount them back to back. The bass is facing the wrong way. The other one may be backwards too. The board has a veneer. The veneer is made of wood, but it is difficult to tell what species it is. There are exposed edges on the board. The spacing for the rods is too close. Keep that in mind. I have a variety of sizes so keeping them on the rack would have been interesting. I am returning this one and canceling the other.
👤It seems like a decent product. I like it, but I wish the pole handles could be a bit more spread out for reel space, but other than that I like it.
👤Good quality. It was easy to set up. I love the fish. It was a perfect hang in the garage.
There areDEAL gifts. 6 fishing rods are neatly and securely stored in the Rod Storage Organizer. Best gifts for men and women. The garage or wall is a ceiling fan. The rod holder allows you to store 11 rod and reel combo in a variety of positions on the wall or ceiling. Rods are not included. TILE INSTALLATION You can put your fishing rod and reel combo in your garage, shed, or other storage area. The innovative design allows for the rod to hold securely in place by adjusting the spacing from the bottom and top pieces. Easy assembly. You can spend less time on assembling and more time out on the water with assembly. The size of theRACK is sufficient for a premium storage solution for your fishing gear.
👤Don't get it wet, it's laminated particle board. It doesn't look bad, but it's not as nice as in the pictures. I bought two sets of rods to hang. I could have built nicer ones if I had waited a bit longer to get them. They put a sticker on the product that was nearly impossible to remove and had to use alcohol to remove it. I would give it 4 stars, but it took about an hour to get that sticker off each one. The screws that came with the kit looked cheap, so I used my own.
👤I knew these were made of laminated particle board, but I had to make my own because it would have cost me more and taken a lot more time. I am glad I bought these. It only took a few minutes to install 2 sets of these on my garage ceiling. If you don't do pullups on them, these will last a long time. I used the screws that were included. If I get more fishing rods, I will buy another set.
👤I bought a similar rod holder for my son, and wanted to get one for myself. I saw this one, and it was very similar. It's a piece of garbage. It's flimsy, covered with thin laminate, and it's terrible. I was installing it when it broke. I don't want my money back. I want to remember the lesson.
👤If you're thinking about getting a rod rack for holding any fishing rods other than a child's Batman or Wonder Woman rod and reel, I would highly recommend you pass on this rod rack. The pressed particle board that is used to make these racks is not the right size to hold anything close to an offshore rod. I tried to post pictures of the cracks in my rack before I put a rod on it. There are pictures of the cracks. There is no way to post pics for this product's review.
👤I had to wait a few weeks to get the insulation pieces from the company. It was difficult to get out of the old screw that was stuck in the holes when I tried to install it, it must have been a return purchase or pre-used because it was stuck in the holes. The wood looks really cheap. I had a hard time getting the anchors to hold in my wall, they kept spinning and it was a nightmare. Do not buy this product.
👤I thought it was a great idea for under 20 bucks, but when it arrived in the mail, it was very flimsy. I don't think the stuff is made out of MDF either way, I should have gotten a piece of three-quarter inch plywood a holesaw and done this myself, which is what I had to do after trying to install this piece of garbage and snapping it in my hands.
👤Simple design, and probably not hard for someone with wood working tools to make themselves. I recommend this product for those of us who don't have the time or tools to make a rack. I mounted this to the ceiling, using dead space. I finally got my fishing gear out of the corner of the garage, thanks to the great quality. I found my measurement to be slightly less than the installation guide suggests, so make sure to put a measuring tape to it before drilling your holes.
There are gift ideas. The magnetic tool is a great gift for men and women who want to expand their tool collection. It is ready to give to someone. The Innovative Patented Design of the fishing pole holder makes it easy to use and store up to 15 fishing rods or fishing rod and reel combo in less than 18” of wall space. Innovative. The KastKing V15 vertical fishing rod rack can hold up to 15 rods or combo in less than 18 inches of wall space. Most brands only have 6 combo in the same amount of space. Rods and combo can be mounted virtually anywhere along the length of the rod, allowing reels to be staggered at different heights for minimum storage space. The innovative design of the fishing pole rack is easy to use. Push the rod firmly into the large or small v-grooves until the grip material grabs it. The rod can be hung with the thread wrapped line guides above the v-groove. The reel can be attached to a 12” rod. To remove your combo from the fishing rod rack, grab the rod near the rod rack and pull out. The KastKing V15 fishing rod holder is made from a tough material which is resistant to heat, chemicals, and impact. The v-grooves are injected with a tacky thermoplastic material to make sure rods and combo are held securely in your rack. The V15 fishing pole rack has three mounting holes. Two holes are on the center of the wall. To install the rack, you need to determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, anchor for center mounting hole, re-level rod rack and tighten all screws. The V15 fishing rod rack will save space.
👤I have a small space and a high garage that make it hard to store my rods. I ordered the V15 and was able to put my rods in a secure area. The rubber stuff that the V have is strong. I'm definitely thinking of ordering another one.
👤I don't know why this is so good. It is a one piece rack that holds up rods. I put up a penn rod and reel combo and it slid down. If the rod guides were resting above the V, it would stay up.
👤The rod racks were taking up too much space in my garage and were getting in the way. There is a The KastKing 2 pack is 30 dollars. The rod holder gave me more space in my garage. The kit has instructions on how to install and mount to the wall. The design holds the rods in place.
👤I've purchased quite a few of the KastKing products. I needed something to organize the rods in the corner of my garage. The design is great and I liked how many rods were able to fit as other products similar to this usually only hold around 6. It was easy to install and I didn't need to use the two holes on the sides that were lined up with studs. Simply screw it in to the wall with the included hardware and you're done. I had an issue with the rods falling and landing on the floor as I put them into the slots. I had to push them harder into the rubber to hold them, but with more flexible rods, I was worried about them breaking. The design needs work, but I like the idea. If you put the rod to far away from the reel in the holder, it will not stay, it will be hard to get it to close to the reel. I have figured out how to get it to work. It takes a lot of time to move the mount. It works well once you patch the small holes.
👤I just bought my first couple nicer rods and needed to organize so the order arrived on time. It took me about a minute to grab my impact drill and sink the three screws provided in the wall, but I used one of the three drywall anchors included for middle whole. The side holes are 16 in each other and sunk into the wall. The rack is made of plastic and comes in a V shape and U shaped slots for thicker rods. This seems to be a product that is made to last and looks very sharp on the wall.
👤If you have spinning reels attached, you can fit more rods on there than they claim. There is a The rubbery material that holds the rods seems to be of decent quality. It has "memory", which means that with use the rubber gets permanent indentations where the rod is held in place. This started happening on my computer after a few months of use. I don't like that it takes a little force to get a rod out, and that it doesn't prevent the rod from falling if the rubber ever loses its grip. I think the rubber will lose its elasticity at some point, but I don't know how long.
The best fishing gift for men is the fishing gear rod storage. The fishing rod storage rack is lightweight and rust resistant. It is extra reliable. The base is made of aluminum alloy and EVA materical, it can protect the fishing rod bottom from damage. The fishing rod holder storage rack can hold up to 24 fishing rod of any type. It takes up less space with the compact design. Their fishing pole storage can be used for many things. The fishing rod rack allows you to organize and display your fishing rods using soft clips at the top and a padded base-plate at the bottom. The rod clips design allows you to adjust the spacing between the clips freely. It can be used to hold up the fishing rod and keep it in place. You can add the number of rod clips you need. It is easy to install. There was no tool needed. It is a great gift choice for the fisherman. If you have a question about the installation, please contact them by email or use the specific installation steps at the discription.
👤The Goture rack was easy to assemble. You can't put something together backwards if they make it. The instructions were easy to follow. The previous generic rack was just as nice. You can see the difference in quality when you compare the two sides. There is a Goture is the winner. The caps fit snug so you don't have to worry about anything falling apart when moving the rack around, and it's a lot more sturdy than other racks on the market.
👤I couldn't get the Kastking again, so I ordered three of the same design, which seems like the exact same design. I ordered multiples since every unit was poorly manufactured. I had to match the base pieces that hold the butt ends of the rods. Only one unit has a component that is holding it on. The mfg control was veryppy. If you can find it, buy it. I added caster to make it easier to push these things around with my rods loaded.
👤I didn't think this would be big enough, but I ordered it anyway. I didn't use the instructions because they weren't great. I had to disassemble a few parts and reassemble them. It took 10 minutes to put it together. It holds everything I need and is just as large as the model I keep at another house. I'm happy.
👤The instructions are so small that they are useless. I ended up in Canada. Glue them together. They need to work out some things and I hope I didn't spend my money on that.
👤The rack is pretty nice. It's easy to slap together, but instructions are lacking, and there are a couple ways you could do it wrong. It is light and has good spacing for rods. My rod and reel combo are in a nice place with room for me to purchase more. It is the best solution I have found and I have bought many of the wall hanging ones. This is better than those.
👤The good thing about it is that it holds all types of fishing equipment. It looks good and adjusts well. The directions are terrible. They are not easy to comprehend. You will be fine if you are mechanically inclined. Two sets of hands are needed for screw alignment.
👤I bought two more because of the product. It's easy to set up. It holds my reels and rods. Instructions were easy to understand. A quality item made in China. I have over 50 rods for all types of fishing, and this product helped me organize.
👤Sturdy and organizes his rods. He didn't like that it didn't hold his rods well. Unless they have reels, you won't fit 24 rods on this.
Fishing pole rack wall mount products from Homydom. In this article about fishing pole rack wall mount you can see why people choose the product. Butizone and Rush Creek Creations are also good brands to look for when you are finding fishing pole rack wall mount.
Homydom, Butizone and Rush Creek Creations are some of the best brands that chosen by people for fishing pole rack wall mount. Find the detail in this article. Petit Manon, Old Cedar Outfitters and Calamus are also brands that their products are worth to check.