Best Fishing Rod Holders for Bank Fishing

Holders 25 Sep 2022 10+ Comments Open

1. RITE HITE Bank Fishing Dual Rod Holder

RITE HITE Bank Fishing Dual Rod Holder

Turn umbrella into a beach umbrella. The umbrella can be held with the sand anchor. The anchor stick in the sand makes it difficult for strong wind to pull it up out of the sand. It's great for bank fishing, lakes, ponds and streams. 2 rods and a lantern are needed for night fishing. Sturdy Steel Construction and a Rust Proof Powder-Coated Finish ensure that you'll be using it for a long time. The soft cushions protect your Rods Finish. Stores Flat for easy transport and storage.

Brand: Rite-hite

👤This is the second one of these holders that I do all my fishing from. I use a lot of rod's and I can't find the old rod holders that I use to use so I tried the first one and loved it. It's big and clumsy and can't be put in a rocky area. Unless you leave it behind, you want to loose it. I use bells when fishing for catfish. I put rocks at the base of my rods. It's easier to get the base of the rod out of the rod holders than it is to put it in the rod. I love mine.

👤If large fish are involved and/or rods are left unattended, bungee cords or straps would be a good idea. I would only recommend fresh water bank fishing for use in sand. I would still encourage the use of additional rod/reel securing straps as this rig is not perfect and large bass don't go to school and keep the rods within the bent curves. Fresh water turtles don't go to school, so they can test the design to its limits. This is an improvement over leaving your reel in the sand, having to constantly tend your lines, or being distracted with little fishermen.

👤Our three boys received these products as Christmas gifts. The value and gauge are amazing. The reason for 4 versus 5 stars is that they are large and heavy to move around. Their size and weight make them less likely to drag along while fishing. Don't let this deter you from these, because the quality is excellent.

👤I saw one of these being used by a friend. I searched all over the place for a good rod holder, but couldn't find one that was easy to use. This is simple and seems to be durable, made of steel and coated with a rubber coating. I have yet to stick this in the dirt because the welds seem fine. If I don't forget it on a bank, I will have this for a long time.

👤I plan on using my new holder a lot. I just bought a second rod and reel.

👤I caught a large catfish while fishing today. I didn't have a bell on the rod and wasn't paying attention. The fish almost took my rod and reel with it when it grabbed the bait. The design of the holder is sturdy and easy to use. If you bite on a large fish, this thing will act like a teeter totter and your rod will go for a swim. When using this holder, I recommend figuring out a simple way to further secure your rod and reel. It's a great buy if you don't have to.

👤I have been using it for a while. Buying another one today. My older one holds the poles in the water while the second one is used for baiting and setting up other poles. Kids are coming of age so more poles are needed. It's a good thing. I'm not sure how someone said this to him. It's strong. We also fish for the big ones. One got away.

2. Rite Hite Fishing Spiral Rod Holder

Rite Hite Fishing Spiral Rod Holder

It is easy to install and carry. The powder coating is durable. The wedge keeps the rod from spinning. The end was sharp. Help get in the ground.

Brand: Rite-hite

👤I am not sure what size poles some reviewers are using. All of my poles fit this. Maybe don't use a shark ocean pole for Pete's sake. The spiral is simple and works well, but I wish it was a few inches longer. All of my heavy and medium rods fit this, even if you measure the size of your pole handle. Simple design and good value.

👤The holder has a small opening that works well with catfish rods, but will not fit bass rods with the butt. If you can bury it deep enough, it will stay in the ground. The holder is flexible even at this depth. This is not the holder you want, if you want something that doesn't give when a fish hits, this is it.

👤These things are useless for anything other than a pole. The diameter of the spiral is not large enough to hold your rods. I don't have a singe pole that would fit. I returned them immediately and wouldn't recommend them.

👤I am very happy with the holder. The metal is very strong and sturdy, unlike other models. This holder can be stuck into the hardest rockiest dirt you can find and put all the pressure you need without it snapping. Will buy again.

👤The bank rod holder is great for catfishing.

👤Can't fit my pole in this thing.

👤A great rod holder. Finding spot soft enough to get down to the triangle is a problem. Use it all the time.

👤Too short. You should find a stick with a Y in it.

3. Amarine Made Automatic Stainless Holders 2

Amarine Made Automatic Stainless Holders 2

It's great for bank fishing, lake fishing or stream fishing. If the fish bites the hook, you pull the fishing line to pull the mechanism, the fishing rod will automatically jump up, with large elasticity and high sensitivity. The gear adjustment is a high-sensitivity regulator. The tail rod fixing belt has three holes that can be adjusted. One spring is enough to meet the required elasticity. The spike is made of a lengthened and widened material.

Brand: Amarine Made

👤I modified a bit to my needs after seeing it in you. It worked.

👤Sturdy enough to push.

4. HelloTree Fishing Automatic Stainless Support

HelloTree Fishing Automatic Stainless Support

There were no sharp edges on the rolled top and bottom. Automatic fishing pole holder is made of 304stainless steel. There is proof, strong and abrasive resistance. It's great for bank fishing. Don't test the fishing rod holder without a fishing pole. The fishing pole stand has a single spring loaded tip-up action. When a fish hits the hook, the linetrigger is activated. You can catch small or big fish with the help of the high and low spring tension. The Universal Fit is a rubber strap that can be adjusted to most fishing rods. The rubber coated brackets won't hurt the fishing pole. Protect your fishing rod by keeping it out of the water. Also, note: The fishing rod holder has to be tested. There is a video on the left of the page that shows how to test the holder. Two long spikes are easy to plug into the soil stable and not spin. Set your rods off the ground and wait for a bite. It is possible to be able to handle maximum tension of over 100 pounds. Show you how to install it. 2 X fishing rod holder and 1 X manual are included. The portable design is easy to carry and store. 100% money back guarantee. They will give you a 100% money back guarantee if you don't like it or it doesn't work for you, you can contact them and they will reply to you within 24 hours.

Brand: Hellotree

👤The action on this thing is crazy. I drank beer while this thing caught fish. I would recommend and buy again.

👤This has a strong spring and is built well. If I catch half the fish that hit this, then I am doing pretty good because I figured out how to use a short pole for faster hook setting and a curved hook. I am not near the pole. It is cool to be reeling in a fish on one pole and you can watch as it goes off and you learn how to catch it.

👤These are great for shore fishing and I recommend them to everyone. The way I enjoy fishing has changed since I got two. They don't always catch the fish, but most of the time they have all been lip hooked. I highly recommend this for people with kids as they don't need as much attention.

👤Not very strong. I tried to put the stake in the dirt.

👤The one that I bought came faulty and looks used.

👤The fishing pole holder is very well built and works well.

👤Well made and durable. Highly recommended!

👤A lot of force is used totrigger and fishing line cuts get lodged in rubber.

5. Coolnice Rod Holders Bank Fishing

Coolnice Rod Holders Bank Fishing

The overall size is 4.6 x 3.6 x 2.2 cm. The knob is designed for small folding and is ideal for store and transport. The universal fit is 1.5 inches wide and can be adapted to most rods like spinning, casting and spincast. The rubber coated U-shape holder is strong and protects your fishing rod from slipping away and scratching. Set your rods off the ground and wait for a bite. Quality plastic construction, light-weight and durable, as well as never rust. The bank fishing rod holder must be tested with a fishing pole. There is a video on the left of the page that shows how to test the holder.

Brand: Coolnice

👤This is my honest, just delivered, straight out of the box impression. Without trying these babies out on a fishing trip, I think they are excellent quality. I liked the design of the ground spike rod holders but was concerned that the top portion of the pole would be plastic. The rest of it is made of heavy duty metal, with the exception of the plastic side screw that holds the ground spike. The quality is impressive for the price point. I will update my review after I take them out, since I have not tried them out yet. I took these out this afternoon to see if they worked and my rating went from a 4 star to a 5 star. They performed well, were exactly what I imagined, and were easy to adjust as I needed. Highly recommended! I was going to buy a rigging for ground fishing that would have cost me $150. I found these. I feel that they are comparable and more affordable.

👤After a couple of weeks, I got to try them. I bought them to use at the river. Sometimes I use them at a lake or pond. They were described and I received them in good order. They were easy to set up as there was not much to understand about how they work. In river fishing, the prongs can be inserted into the ground or in a sand/dirt mixture. I like that the angle of the holder can be adjusted and that the angle can be locked in so that when you return your fishing rod to the holder, it returns to the angle that you chose. They are easy to carry in your location. They seem strong for most of the time. They are reasonably priced. The prongs are too short in some cases where you need to insert them all the way in order to hold your rod/reel in case a larger fish hooks it on your line while you are busy baiting another line or tending to other gear. When fishing in sandy areas, muddy areas or even a complete sandbar, one must angle the holder backwards. They are enough in holding when in more solid ground. The adjustment rings are made of plastic. The river's current pulling the rod somewhat has caused one of my holders' rings to cross-thread. Fishermen will know what I'm talking about. I can't get the ring to move because it is plastic, so I'm afraid to use a tool or force to correct the cross threading. One of my holders is stuck at this angle. If I want to fish more than two lines at a time or if someone goes with me, I would probably purchase an additional set. I hope that the seller reads the reviews and uses metal adjustment rings or offers some with longer prongs as an option.

👤The bank fishing rod holder is sturdy. The design helps in setting the hook by allowing the rod to move backwards and forwards as you move the rod to set the hook. The people who gave these rod holders a bad review seem to not understand how they are supposed to work, so I bet you were tired from just getting home from work when you first opened the package. The design of the rod holder is such that the weight of the rod is not designed to lock it into place; once you adjust the knob to set your rod's stationary angle and place the rod into the rod holder, the design is such that the weight of the rod is not designed The element on the knob is shaped so that the rod and reel will stay at the set angle. The feature allows the rod holder to be turned back. When you get a bite, you don't have to grab the rod and pull it out of the rod holder, you can grab it and pull it back, which could help in setting the hook. So far, so good, I haven't had a chance to try it many times.

6. JSHANMEI Aluminium Baitcaster Spincast Spinning

JSHANMEI Aluminium Baitcaster Spincast Spinning

Anti-corrosion is a disease. The fishing rod support is made of a very strong material, it is very durable and long lasting. Accommodates spinning, casting and spincast rod handles. There is a construction of a structure called the PRISM CONSTRUCTION. The construction of the prism is very stable and easy to plug into the soil. The rod support consists of three separate pieces that are screwed together in one sturdy unit: the orange tubular pole holder, the spike and a circular metal intermediate threaded connector. Debilitating and Portable - is what it is. The middle piece can be screwed into either side with the sharp bottom piece. The holder can be removed if you don't use it, and you can reduce the size for storage.

Brand: Jshanmei

👤Total waste. I can not imagine a rod with a three long handle. These don't work on my spinning set ups. The pictures looked good.

👤The trash is made of aluminum. I can't dig into the ground harder than sand. First attempt into semi-hard soil, one breaks. The second one is soft for Arizona. You can buy the spring ones for $3 at the wal mart.

👤The stake is made of plastic and it is bent over trying to set it up. I don't see this lasting long after 10 fishing trips. I expect it to last a few years but I don't think it will last over a year.

👤These are small enough that they don't take much space, but you can always find a tree branch or rocks to hold your fishing pole. It is very easy to go into the ground. The pole is upright, and it has a big fish hammering the bait. I am glad I picked them up. The price is also great.

👤It fits in the bottom of my tackle box and collapses in half. I have different sized rods that fit in the cup.

👤Well built and Sturdy. The spike ends of the rod holders I bought were often bent or broken when impaling into hard ground. The spike ends on this model are solid and I have not bent them when impaling into the ground. I bought the four-pack because I tend to forget the holders after fishing, so it is useful to have replacements ready.

👤I don't use it like most would. I take two rods to bank fish. I put my rod in the ground to keep it from getting damaged, instead of laying the unused rod on the ground. It's well made and doesn't take up a lot of room in my tackle box.

👤I have several of these and they are very sturdy and easy to use.

7. Fishing Holders Support Aluminum Adjustable

Fishing Holders Support Aluminum Adjustable

The material is upgraded. The bank fishing holder is made of reinforced steel and is more friendly to fishing rods. The drill rod is made of STAINLESS STEEL and can easily go into the ground. The bank holder is sturdy. The design is easy to carry. The nut on the head of holder is hard to loosen, and it rotates 180 degrees horizontally and 130 degrees vertically. You can change the angle of fishing by the sea, river or lake. The large holder is suitable for all types of fishing rod. The package includes 2 pack fishing rod holders.

Brand: Wjskdq

👤The holders were delivered quickly. All metal construction. The dual ground spikes are long enough to keep weighted rods from touching the ground even at high angles. You can adjust the rod angle to the height you want. The holder can accept even surf pole handles. The holder is large enough to hold fat fingers or arthritic hands. They are easy to store in 2 pieces. I can't tell if they are cons or not. I don't think there should be any instructions or warnings for the sharp ground spikes. Even though it's common sense to not poke your eye out or shove it up your butt, you need warnings.

👤The spiked fork can be easily separared from the holder. I use a malet to drive it. It's super flexible.

👤I am not sure how strong these are. I gave them to my husband. He liked how they were adjusted. We will see how long they last.

👤I was looking for a good price. You can have your rods at any angel. They will last as long as I need them. If I need more, I would buy again.

👤The product is very strong. I used wine corks to make tip protectors.

👤I use it for any type of fishing pole.

👤The pole holder is very small. The mobility is great. It can be put in my back pocket.

👤I got these for my husband and he loves them.

8. SamsOutdoorsman MiniFighter Fishing Holder BLUE

SamsOutdoorsman MiniFighter Fishing Holder BLUE

Product type: fishing equipment Sam's Outdoorsman is an American company. Stress tested for 100 lbs. with 100% Steel construction, 100% TIG welded, durable Industrial quality powder coated. Don't be fooled by attractive offers. Sam's Outdoorsman only sells their items on Amazon.

Brand: Samsoutdoorsman

👤I wish they had some type of padding to protect the reels and fishing poles from getting scratched when you take them out of holder in a rush.

👤I've tried many of these pole holders and this one is my favorite. The bait holder on the side is nice, but I wish it had a cup holder. I like the height and quality. I will buy another one.

👤The product is solid. I have two of the old ones that were 2 piece and they are much better. Would buy again. I wish it was prime.

👤I have ever used a rod holder like this. Would like to purchase more.

👤This pole holder is very nice. They are what I have been looking for. I received several inquires and comments. The picture shows the difference between my old pole holders and the ones I have now. There is a The bait holder ring is not a flaw for me. A drink holder would be more useful for me. There is a I will figure out a use for the holder eventually. I will be purchasing a few more in the near future.

👤This is a great product. I had some delivery issues that weren't the fault of Samsoutdoorsman. The problem was solved by Samsoutdoorsman. All companies should strive to attain a level of customer service that they have raised. This is the best rod holder on the market, if you like to fish from the bank.

👤It is easy to store and reach from your chair since it is tall. It is easy to put in the ground and easy to remove from the ground. I got a second one because I liked it so much.

👤Solid construction. I took off a star because the reels were upside down.

9. Berkley BAVRR Vertical Rack Black

Berkley BAVRR Vertical Rack Black

The rod rack can hold up to 6 rods. The foam grip pads hold rods securely. A lightweight plastic design. It is a long lasting proof of corrosion. 6 rods are neatly and securely stored.

Brand: Berkley

👤Two people need to be hit. 1. The person decided which screws to include. The person agreed. The rack is great but the screws are terrible. They are flat head. Is it a flat head? Who uses flat heads now? There was a terrible decision. They're only about the same length. The mount point is thick. You know what it is? Hmm? You are correct. The screws don't reach the studs in the wall. Do you see the issue? Pulling out the rods from the brackets. How long do you think it will take for the rack to fall off the wall and the expensive rods to fall to the ground? Okay. Maybe it's not that hard. You know what I'm talking about. Not sure about you. I wouldn't trust these tiny screws in the wall to hold my rods and reels, they are 16" apart, and no drywall anchor is included. Most framed walls allow you to mount. The screws are long enough. rant over. The screws were replaced with 1-1/4" drywall screws. I'm not worried about the rods falling off the wall because they are now organized and off the ground. If anyone from Berkley is reading this. The wall mount rack is very good. Still. I mentioned those two people before.

👤It was perfect. What I was looking for. There is vertical support for 6 reeds. The plastic material has a good finish. I have used it for 4 spinning rods with their 3000 and 4000 reels. Pros. The material is resistant. It can be mounted for different lengths of rods. The base in the vertical kit has front support so it can be mounted horizontally and still hold the fishing rods. The upper support has high density foam. There are screws for wall mounting. There are Cons. The screws are good for wood, drilled brick or concrete, but not for plasterboard walls. SPANISH review perfecto. Justo, buscaba. Para 6 caas, soporte vertical. Material plastico de gran resistencia. He has a problema con 4 caas de spinning, 1 x 7'0'' medium light, 1 x 7'0'' medium heavy, and 2 x 8'0'' medium heavy. Pros. Material resistente. Puede para caas. En el kit horizontal, la base tiene soporte frontal. Espuma de alta densidad. Incluye tornillos para montar. There are Cons. Los tornillos estn para madera, ladrillo o cemento previamente taladrado.

👤These were easy to install and work well. I worry that the hard molded foam will not hold up over time, but I am careful as I put the rods in and out. The TWSS. It is easy to install and do the job. I don't have a picture of it in use, but I have a great picture of all my girls fishing, so you can see why I need to be able to store multiple fishing rods. There is a better picture.

👤I bought this because it was cheaper than the Rapala rod holders. It is cheaper in every sense of the word. The foam is hard to navigate. I ordered another Rapala rod holder and recommend you do the same, as the far right holder shows the foam missing where it fell out.

10. XJunion Stainless Fishing Support Folding

XJunion Stainless Fishing Support Folding

The metal design is sturdy. 1. It was made of high quality STAINLESS STEEL and was lighter than the original iron brackets. 2. The design of the fishing rod brackets makes it easier to carry. The brackets are inserted into the steel. The insert is more stable. Higher wear resistance. 4. The full length is 30.5 cm / 12 inches. 5. The kit has 2 fishing rod brackets.

Brand: Xccme

👤These rod holders are really nice. They fold down pretty flat, taking almost no room in my tackle bag, lightweight, seem sturdy and a bargain 2 for $11. I was worried the back ring would be narrow to hold my rods, but they hold my heavy spinning rod and Ugly stick with no problem. I am not sure how they would work for other types of rod, such as bait casting or spin casting, but they work fine for me. I wish they made a bigger version of these. I'm ordering another pair soon. They give you two bite alert bells as a bonus.

👤It can fit in. Most of the kettle bags... The issue is that the stakes is very short and when pushed into the ground. There isn't much room between the ground and theEEL. Also... The ring of this ruler will not fit in a flared out taper end. TheOLDER is best for smaller fish.

👤Nominal Value! A big bang for a few dollars. The bells are sturdy and loud. The stands held a small pole when a 6lbs carp grabbed the line. They work for all my rod sizes. I trust my rods.

👤The rod base has to be pushed deeper into the dirt in order for it to be secure, and my reel sits in the grass because it sticks in the ground. I can get a surf spike for less money.

👤I got them and was excited to try them out, but after 15 minutes they couldn't support my light weight pole, so I threw them into the lake. The kiddy pole was still to much weight when I gave it to a father and son. Either I got two bad ones or they are not worth anything. Did like using the rattles.

👤They fit in my tackle box. Keep a hold of the pole. They stood a little straighter.

👤Awesome product has no issues.

👤It's easy to store for small rods.

11. SeaSense Single Piece Holder White

SeaSense Single Piece Holder White

New Zealand made something. The loading limit is 300 lbs. The Railblaza C-Tug is the most versatile kayak cart on the market. Hardware for mounting 17-1/4" x 1-3/4" x 6-9/16"

Brand: Seasense

👤The rod holder is of decent quality. There's some leftover flash from the manufacturing process. I use a steel target stand with my portable rod stand. The dimensions are incorrect. The left to right length of the rod holder is 12 and 9/16", which is measured across the back of the mounting brackets. The center to center horizontal and center to center vertical distances are 7 and 1/2, respectively. The rod holder's vertical height is 10 and the thickness is 2 and 9/16". The rod holding tubes are 5" apart. The inside diameter of the tubes is 1 and a half, but they flare out at the top to 2 and a half. The slot for the reel stem is 3 feet wide and 9/16 feet long.

👤The package and description both mention the width is 17 feet, but it is only 13 feet in the package. I plan to mount it onto a milk crate, which is 13x13x11. Will be great to carry my kayak or even the pontoon to the beach.

👤I mounted them on my boat. I can put them in the holders on my boat. One less item to carry. Some of the reviews said they were bad. It depends on how you mount them. I love them and have no issues so far. Don't worry about my rods being damaged if they are on the floor of my boat.

👤Sea Sense Single Piece 3 Rack Rod holder was easy to install on my Lund. Rods are out of the way for rapid use. Durability is a test of time and use but have not tested longevity yet.

👤I was very impressed with the quality of this item. I store my fishing gear in a kayak milk crate and have installed these on it. The rod holders were a great addition to my container. I highly recommend it.

👤I like to organize everything when I go on the water. I put it on a cooler. I have scissors and fishing pliers in this place.

👤If you need a 3 place rod holder, this is a great option. The slots make it possible for the rods to lock in place and not just spin in the holder. It has everything you need to mount it.

👤The rod holders seem to work well for my boat. I use them for my spinning rods and dip net. The screws they came with appeared to be #10. The grip on my casting rod is too large for them to fit it. Check other reviews for the correct dimensions. The dimensions stated on the package are incorrect.

👤I gust y lo encontr a buen.

👤I bought this because it was cheaper than the name brand versions. The plastic is not strong. It broke while trying to put it in place. Get the real deal by taking some time.

👤I look like a pro now. When loaded, it was held up perfectly and easily. This should have been done a long time ago. I don't step on rods in my boat anymore.


What is the best product for fishing rod holders for bank fishing?

Fishing rod holders for bank fishing products from Rite-hite. In this article about fishing rod holders for bank fishing you can see why people choose the product. Rite-hite and Amarine Made are also good brands to look for when you are finding fishing rod holders for bank fishing.

What are the best brands for fishing rod holders for bank fishing?

Rite-hite, Rite-hite and Amarine Made are some of the best brands that chosen by people for fishing rod holders for bank fishing. Find the detail in this article. Hellotree, Coolnice and Jshanmei are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to