There are two Rod Storage Racks. The package has a dimensions of :12.192 cm x 35.56 cm. The package weight is 0.699 pounds. There is a product type calledSTORAGERACK.
👤The large and small channels are the same on both of the pairs. They should make them so that the large channels align with the small in an alternating fashion. I don't understand why they didn't think of this. I bought three sets and the same problem still exists.
👤I use these rod holders on my boats. Our boats are made of fiberglass. It was easy to drill holes in the strap. I like the fact that the straps are not pre-drilled, so I can align the holes where I want them. I push the ice pick through the straps. I find that they are easy to mount on the sides of the boats. Our boats were made with rod holder blocks in place, they are wood encased in fiberglass as part of the original mold-up of the boat. The real test will be how well they hold up to the abuse they get from those who rent boats. They will be worth the money if they can take the day-to-day pounding. I put four of them in each boat. I'll get reports back from those who use them, so in a few months I'll report back here with both mechanical and use reports. For the price of one set, they are almost disposable for me. It takes ten minutes to mount these. I used the rod holder as a template for the hole location, using the included screws and pre-drilled mounting holes. It takes a little work to get the plastic mounting thing in place, but it takes only a few seconds. The actual dimensions of these holders are 11 inches long by 2 inches long, not the dimensions given in the description.
👤The product looks good and will last. The straps are loose and not attached to the foam body making it difficult to install. The installation holes are in the center of the foam and you have to go through the strap to break it. I pre drilled the straps and glueed them together, then made it work. Pre-drill holes in the straps would make the whole thing better. The product is what I needed, but the set up for installation made me snap the foam, which earned me 2 stars.
👤The set that I bought was worn out. They work well and were easy to mount. I like the fact that they snug down tight to keep my fishing rods from rattling around, other rod holders don't tighten well and let your rods bounce around. The price is very affordable compared to other products of this type.
👤It worked well to hold up to 8 rods in my boat. The black straps don't have a pre-drilled hole for the screws to go through, so I gave it 4 stars. If you don't take the time to do this correctly, you may mess up the straps. The product was good.
👤My rods are neatly stored in my boat. We don't have to replace broken equipment when we store our rods and reels in our boat.
A high quality, mirror finish marine grade STAINLESS STEEL construction with injection molded ABS inserts to protect valuable rods and tools. The plastic body is strong and lightweight. 10 inches. Each tube can hold one fishing pole upright for storage, as well as being available for fishing lures, a filet knife, pliers, and tackle. It is easy to install and remove. It's also great for installing in kayak, fishing cooler, trailer and etc. Good for bank and sea fishing. Please contact them if you have any questions. Good for bank and sea fishing. Please contact them if you have any questions.
👤The quality rod holder was installed as expected. I would recommend it 100%.
👤The mount base is flimsy. It looks like it has a base that snaps on. There is no base to speak of and only the holes and hardware that are not to be trusted are used. I had to add straps to keep them from breaking.
👤Being mounted on a roof rack is nice.
👤Our camper was added to hold hiking sticks and fishing rods.
👤Make sure you have enough time to reach fully, other than that no compliants.
The rod rack can hold up to 6 rods. The foam grip pads hold rods securely. A lightweight plastic design. It is a long lasting proof of corrosion. 6 rods are neatly and securely stored.
👤Two people need to be hit. 1. The person decided which screws to include. The person agreed. The rack is great but the screws are terrible. They are flat head. Is it a flat head? Who uses flat heads now? There was a terrible decision. They're only about the same length. The mount point is thick. You know what it is? Hmm? You are correct. The screws don't reach the studs in the wall. Do you see the issue? Pulling out the rods from the brackets. How long do you think it will take for the rack to fall off the wall and the expensive rods to fall to the ground? Okay. Maybe it's not that hard. You know what I'm talking about. Not sure about you. I wouldn't trust these tiny screws in the wall to hold my rods and reels, they are 16" apart, and no drywall anchor is included. Most framed walls allow you to mount. The screws are long enough. rant over. The screws were replaced with 1-1/4" drywall screws. I'm not worried about the rods falling off the wall because they are now organized and off the ground. If anyone from Berkley is reading this. The wall mount rack is very good. Still. I mentioned those two people before.
👤It was perfect. What I was looking for. There is vertical support for 6 reeds. The plastic material has a good finish. I have used it for 4 spinning rods with their 3000 and 4000 reels. Pros. The material is resistant. It can be mounted for different lengths of rods. The base in the vertical kit has front support so it can be mounted horizontally and still hold the fishing rods. The upper support has high density foam. There are screws for wall mounting. There are Cons. The screws are good for wood, drilled brick or concrete, but not for plasterboard walls. SPANISH review perfecto. Justo, buscaba. Para 6 caas, soporte vertical. Material plastico de gran resistencia. He has a problema con 4 caas de spinning, 1 x 7'0'' medium light, 1 x 7'0'' medium heavy, and 2 x 8'0'' medium heavy. Pros. Material resistente. Puede para caas. En el kit horizontal, la base tiene soporte frontal. Espuma de alta densidad. Incluye tornillos para montar. There are Cons. Los tornillos estn para madera, ladrillo o cemento previamente taladrado.
👤These were easy to install and work well. I worry that the hard molded foam will not hold up over time, but I am careful as I put the rods in and out. The TWSS. It is easy to install and do the job. I don't have a picture of it in use, but I have a great picture of all my girls fishing, so you can see why I need to be able to store multiple fishing rods. There is a better picture.
👤I bought this because it was cheaper than the Rapala rod holders. It is cheaper in every sense of the word. The foam is hard to navigate. I ordered another Rapala rod holder and recommend you do the same, as the far right holder shows the foam missing where it fell out.
The interlocking design makes it easy to expand the rack. The rod storage rack can hold up to 6 rods at the same time. The rod-protecting designs in tough plastic help keep your rods safe. The overhead rack has a twist lock design. There are screws in the set. The dimensions are 13 2/8" X 2 1/2"
👤Fast shipping to Alaska. They do not handle large diameter halibut rods.
👤No more stepping on my poles in the boat.
👤The slots would have been 5 stars if they had been further apart.
👤Only one piece was received. Did not get the 2nd or the screws to make a set.
Protect your reel and rod. Made of InjectionMolded Polypropylene. Installation in a 2” hole is the size of the 8” inside diameter.
👤I believe it came with 2 because of the picture. I made a mistake when I came with one. Thanks for the package and delivery.
👤These should cost $3. They are cheap. Get metal rod holders if you add a few more dollars. You can pay $5 to 6 for better quality at Walmart.
👤They worked well for me. The bottoms have a stopper. Did not have a drill pattern or mounting hardware. It was worth it for the price.
👤It was a perfect replacement for what I had.
The Cast 356 hard anodized aluminum wing- nut and sleeve set is durable. A slot at the front of the cradle allows for a spinning reel to be securely held in position. It folds nicely to take up less space. The nylon is made with reinforced engineering grade nylon and has high impact resistance. It is possible to adjust up and down and with a horizontal rotation. It's great for boats or kayaks. Includes hardware made of steel.
👤After the second trip, it was lost. It went right into the water when it pulled up on the rod.
Mount is sold separately. There is a three-position configuration. Tension knobs for quick rod adjustment. The base can be mounted on top or side. Cannon rod holder accessories are not included.
👤I don't write many reviews on Amazon, but I have used these rod holders for a few years and just ordered 2 brand new ones for my new kayak. I just happened to look at the rating and noticed a few low reviews, but I was surprised by what people would think of these. The most common complaint people have for these is lack of mounting hardware. I haven't bought another brand of rod holder in a long time and can't remember if any of them came with hardware. These are made to fit multiple mounting options. I have sockets mounted on my old aluminum boat with wooden gunnels and a small plywood deck on the back. I built a kayak with a custom "dashboard" and converted it into a fishing boat and cockpit. If anyone knows of a single type of mounting hardware that would fit in the box with these, please contact me. I want to invest in the company that makes it. I'm off my soapbox about that. The provided sockets can be mounted flat or vertically to handle many applications. If the provided mount doesn't work for you, there are other options. The shape of the holder is thought out. I use them for both my trolly rods with baitcasting reels and spinning outfits with different rod butt lengths. Several of these have been on the aluminum boat for a few years. I'm too lazy to take them off the boat when they're not on it. They've been beaten to death by California UV rays, but other than that, are still holding up well. The price of these products is not cheap. Other manufacturers make less functional versions. Several of them were used with mixed results when I was younger and poorer. "Finish and fit" on the stems. I bought a pair of these for a friend. They work but are very hard to get into the sockets. I gave them 4 stars instead of 5 because they seem to be wearing in. There is a There is no standard replacement post available. This probably isn't that big for most people. I use rod holder sockets to mount other fishing accessories. It would be great if Cannon offered just the posts. I want to beam me up. I hope my review helped anyone considering these.
👤Excellent Rod holders. They are a good price. Look great and function as advertised. I want a 5 star rating for myself. Cannon has accomplished that, as I have owned the Scotty Rod Holders, and they are just as good with a better price point, and they look great on the boat. Highly recommended!
👤I need a rod holder for my canoe. I decided to go with the Driftmaster style for the ability to adjust positions. I'm glad I did. I have a heavy duty holder that has great adjustment capabilities. I expect a long time of service from this holder.
👤Excellent quality for the price. Well constructed and sturdy. I love it on my kayak. I like it better with my baitcaster.
StoreYourBoard in Virginia designed and engineered the patent Ponzi design. The 13.6” width fishing rod storage rack holds up to 6 fishing rods and reel combo vertically to save space. It's better to change the reel to fit the rod differently. Straight lineup is not allowed due to reel width. It's good to keep your rods organized. The rod racks have an interlocking system that makes it easy to expand and store. The rod holder is easy to install and comes with 6 screws. It's possible to put it into a wall and put your rod rack gear on the wall in less than 5 minutes. The fishing poles are protected from being scratched or damaged with the rod rack. Your fishing poles should be new. The rod diameter is 0.2"-0.4". There is a measurement of 5mm-11mm. The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks. The fish pole holder is made from sturdy plastic material which is resistant to heat, chemicals, and impact, long lifetime, not decay like wood pole racks.
👤I was excited for these to come in and organize my collection. The foam in the photos does not look like it did when I put my rods in. The foam in the photos looks very close to what I received. I put the top piece below the first eyelets on the rods so that the rod is thicker where the foam hits, and the rods still fall out because the foam is not supportive. I was able to pull the foam out on one side to help hold the rods in, but I wish it would have worked on its own.
👤We fish a lot. There are over 70 rods that were always stacked against corners. We had to go through several stacks before finding the rods we needed, and we were always looking for specific rods. I wanted to see how we liked them. We now have 10 total and love them all! I put them up myself because it was easy to install. I ordered a size that fit all of the rods.
👤I like these. I got the wider version so there is more space between the rods. I can't imagine getting the narrower ones. The wider one would fit rods and reels.
👤It was shortened to make it easier to ship from overseas. The product is made of plastic and foam. The holes are 13 inches apart. Adding an additional strip of wood is not a solution for wall anchoring. I wanted a solution that didn't require me to go to the home store to pick up more supplies. Our friends overseas have a bust. USA studs are on the center.
👤It seems nice. They may have changed the design because of the reviews complaining about loose foam. It was too tight for the kids to use. If you want to drill straight into your studs, you should use a 16" version.
👤My husband's fishing rods weren't leaning on things in the garage. He likes to open the garage door and see the rods on the wall. It was easy to install and a great surprise for him.
👤There is a problem with the small plastic mounting tabs. The plastic tabs will crack if you tighten the screws too much. They are not large enough to last. I am a mechanical engineer and the tabs should have been larger, made out of a more durable material or have metal sleeves on the back. I helped the seller design a better product. There are two mounting tabs on one side and one on the other side. I think I will be replacing the unit soon.
👤Like this product. Does as advertised. If you try and store 5 rods with all reels attached, you'll have to change the rotation of each one. Straight lineup is not allowed due to reel width.
Complete with all the necessary hardware to mount to a rail. 304 STAINLESS STEEL is the material. 15 degree angle to vertical 9in tall tube has a 2in OD. The rubber cap and tube liner are not included. Heavy-duty units with solid cast frames are more durable.
👤The neck of the tube is large. It was made. I had to rest and with that hole on fiberglass, it tried to expand for the neck. The design could be better if it was put in a rubber gasket. Otherwise good.
👤I was looking for a good buck flush mount rod holder. I wanted to spend as little money as possible. The rod holders are great. I would highly recommend these. It was worth every penny.
👤I love them because they are strong and have an excellent finish.
👤Should come with screws.
The package includes wall brackets, mounting screws, and wall anchors. Does not include fishing rods. The design allows for the rods to be fixed in place. The asymmetrical design of the fishing rod rack is used. It can hold up to 9 fishing rods. rods are not included It can be installed on the wall or on the ceiling. Installation on both sides is more stable. The fishing rod rack has a black coating finish for protection from the elements. The fishing rod rack can be used to store the fishing rods in order to keep the room, garage and cabin organized. The fishing rod rack is easy to clean and has a smooth surface. The fishing rod rack is easy to clean and has a smooth surface.
👤My wife got me this for Christmas and I love it.
The only genuine dealer is e-jades. If the bank fishing rod holder didn't work for you, or you don't like it very much, please contact Amazon for a refund. The material is made of high impact co material. There is multi-positional mounting. Hardware is not included. Universal Fit is the type of fit.
👤First of all, these things are amazing. They are not the big expensive brand rod holders, but they are the best rod holders you will ever find at such a low price. I don't think it's smart to spend hundreds of dollars on name brand rod holders when they work at a pro level. Turn and lock into place just about anywhere you need. Has. A rod lock on the top so the big one doesn't take your rod, can adjust the angle your rod sits up in the holder, and can easily take rod holder off to put boat cover on without any problems. I put it on a thin wall on my fiberglass boat and it holds up very well. I have had these puppies thrown around as I go fishing with the boys.
👤I ordered a second pair of rod holders because I can't build them cheaper than I can buy them. These heavy duty rod holders will allow you to set your rod angle to whatever you want. In case of a strike, rods can be locked in so that you don't lose them too much. There have been a lot of complaints about the rod holders, some of which are not true. Pull them up and twist them to push them down. It couldn't be simpler. They're a little stiff because they're new. I'm sure they'll loosen up a bit. They're not carbon fiber, but they don't need to be. They seem to be made of a heavy duty plastic that will last as long as I do. If you buy two additional mounts on Amazon, they are the same price as the two-rodholder package. I paid $7 for each rodholder and mount from the Amazon Warehouse. The rod holders are better than the carbon fiber holders, but the elitists will not get better than them even if they pay more. I buy value even though I can afford the expensive ones. The Wise Rod holders are a great value.
👤I should have spent the extra money on the Scotty holders because I bought these to save a few dollars. They worked great for our first few trips, but they wore out and wouldn't stay in the locked position when we got a big bite from a salmon. We missed some fish because the rod wouldn't hold it out when the fish was biting. These are great for smaller fish and lighter gear, but they can't hold up to larger fish. Purchase the scotty holders and spend a bit more. I had to do that because these stopped holding in the locked position.
👤The fishing rod holders are very nice. I bought these along with other items for my boat. I mounted them on top with the side mount hardware. If you prefer the flush mount type, they also offer it. They operate well and were easy to mount. You can remove the holder from the mount and move it to another area of the boat. The price at Amazon was the most reasonable I had found, and I had searched other places.
Fishing rod holders for boat black products from Boatbuckle. In this article about fishing rod holders for boat black you can see why people choose the product. Jooja and Berkley are also good brands to look for when you are finding fishing rod holders for boat black.
Boatbuckle, Jooja and Berkley are some of the best brands that chosen by people for fishing rod holders for boat black. Find the detail in this article. Pactrade Marine, Marine City and Meter Star are also brands that their products are worth to check.