The rack is 22.83"L x 14.37"W x 23.74"H. Fight damage and increase accessibility by organizing your rod collection. Not affected by sun or salt. There is a mount in the garage, basement, boat house, camp or cabin. It holds all the fishing rod shapes. The construction is heavy-duty steel and has a width of 4 inches. The components include fishing rods rack, mounting hardware.
👤A perfect solution. I wanted to see if they would fit my plans. I bought a total of eight because they looked like what the doctor ordered. I put them over the garage door to keep them out of the way. The arrangement made it easy for me to get my fishing rods off the floor. I would recommend these to anyone with similar plans. Attached are photos.
👤The product is very good but overpriced. People are complaining about no instructions. There are not many ways to mess up hanging these. If you took the reels off or didn't mind having to fight them in and out, you could get 12 poles up with this. I use it for 6 rods and reels. Each set of hooks is about 5 feet apart. My counter reels are about 6 feet wide. The six rods fit nicely in the rack, but you have to adjust the reels to make them fit. It's still easy to get them in and out. It is a simple design and should last a long time. I put this rack over my boat so I don't have to worry about breaking rods when I come home. I can hang them up.
👤I don't do much fishing anymore, and I wanted to keep some of the rods that I used when I was a kid. I like that the rack mounts up high, the rods are easy to put up, and the coating on the rods keeps them from getting scratched. If I fished every day or week, I might want a rack that is set up on a wall or in a turret, but for rod and reel storage, I don't see how this rack can be beat.
👤If you only had a few boom sticks with big reels and saltwater rigs, it would be hard to fit the full amount up there. You will be fine if you just staggered them a bit. I didn't have to worry about my rigs fitting up there. Most of the large rigs are mid-sized bass rigs. Everything fits perfectly and is out of the way of the foolery of family and friends that may be trampling through the shed. I love this rack. The metal construction is very strong and soft on the hardware. Highly recommended.
👤This is my second set. The hooks on the first set were the same size as the ones on the second set. The design of the set has changed, but it still has alternating large and small hooks. I mounted these to my garage ceiling backwards so that a small hook would line up with a large hook on the opposite side. It encourages you to store your rods in alternating directions. I don't think I have enough room to install more, but if I did, I would order more of these. I like having my rods up out of the way. My rods don't get dusty where they are mounted.
👤I installed this in about 5 minutes. I was able to keep 12 large fishing rods. The mount is used for my catfish, striper, and sturgeon rods. The reels areStaggered. I read that it is not the most robust storage, but it is the only one that supports the weights of fishing poles and should last forever. I'm buying 2 more for the rest of my fishing gear.
There are two types of fishing pole holder. Both can be mounted on the wall of a garage or workshop to prevent damage. The Horizontal Style can be put on the wall to prevent injury to children. SPACE SAVER 2-in-1 rack can be mounted on wall or ceiling to store your fishing rods, provides you with simplified and hassle free storage. It's great for storing fishing rods, hiking poles, ski poles, hockey sticks and cue. The fishing rod storage rack is made of heavy duty steel, which makes it more sturdy. It can hold up to 8 rod and reel combinations. The distance between the bottom and the top can be adjusted to accommodate the fishing rods length. Place the rods stable with the design. Black powder coated, which provide maximum protection, prevent from corrosion and scratch. It can be used for a long time. It's easy to install. There are no special skills required to mount a fishing rod rack. Installation is easy with the mounting hardware included. Fishing Rods are not included. It's easy to install. There are no special skills required to mount a fishing rod rack. Installation is easy with the mounting hardware included. Fishing Rods are not included.
👤He put them in the garage. It's easy to get there, out of the way. The rods were being knocked together by falling over. Now that his babies are protected, he will be happy. I think everyone who hates to see rods thrown in a corner is worth the money because I know you do it. There is a lot of room with our garage door openers. Just stop reading and buy them, you know you want them too. No more excuses. I am done now but they really work well.
👤I should have bought this a long time ago. It's a great space saver. I only have 7 rod/reel combinations, so this one is perfect for me. When I needed something out of the corner, I was shuffling my fishing poles around. I leaned into a corner. Highly recommended!
👤I went to put this up and thought about where it would fit best. I tried it on my beach rods and it had openings for fly rods or small bait casting rods. My beach rods wouldn't fit in the openings. Nice idea but needs to be refined by actual users.
👤I had to get this product for myself because I liked it so much. The fishing pole storage was very artistic. He could keep his poles in a safe place.
👤If you hang them from the ceiling, they will work. Unless your rods have reels attached, the openings are too close for wall mount.
👤Grandson loves having his poles organized.
👤It's perfect for hanging fishing rods. Shipping was fast. Product was described.
👤Large poles did not fit but they were great.
Comes with 2 packs. The fish rod rack is a good choice for small trucks, garage, mobile homes and camper shells, even it's a good choice for the car with 4 Arm Rests. The boat horizontal rod holders are suitable for 6 Rods Storage. Appropriate size for you to store about 6 pieces of rods makes your home or garage well organized and clean. The horizontal fishing rod rack is easy to install and disassemble, and you only need to use the 6 installation screws and the matching mounting hardware. The fish rod holders for boat are made of plastic material, and the grip pad is made of elastic foam material, not easy to bend or break, can be kept and applied for a long time. There are 2 pairs of boat mount fishing rod holders, which are nice to have in your possession, and you can use them to store your fishing rods. The horizontal fishing rod holders are suitable for many decoration styles and places, such as game rooms, restaurants, bars, clubs, and so on.
The fishing rod storage rack is made of high strength ABS base seat and is weather proof. The fishing rod storage rack can keep your fishing rods off the ground to prevent damage and organize them. You can put your fishing rods on the wall. It's perfect for home or garage storage. The Fishing Rod Storage Rack is capable of holding up to 7 rods, enough for home and commercial use. It's easy to install. It is possible to spend more time on the water fishing. When you're ready to store the pole, grab it and put it in the storage clips.
The interlocking design makes it easy to expand the rack. The rod storage rack can hold up to 6 rods at the same time. The rod-protecting designs in tough plastic help keep your rods safe. The overhead rack has a twist lock design. There are screws in the set. The dimensions are 13 2/8" X 2 1/2"
👤Fast shipping to Alaska. They do not handle large diameter halibut rods.
👤No more stepping on my poles in the boat.
👤The slots would have been 5 stars if they had been further apart.
👤Only one piece was received. Did not get the 2nd or the screws to make a set.
The dimensions are 13 2/8" X 2 1/2" The space saver is located in the middle of the room. This is a great fishing pole holder for your garage, shed, and other indoor or outdoor storage areas. There is resilience and light. The fishing rod holder is made of high grade plastic that is strong and resistant to rust. 6 Rods capcity with interlocking design allows easy rack expansion,durable EVA foam grip pad protect your rods from scratches and securely,Base grip holder takes the pressure off rod eyes,prevent deform or weaken the blank, Simple installation. It is easy to mount in horizontal or vertical for wall and ceiling with the included 6 screws. There areDEAL gifts. 6 fishing rods are neatly and securely stored in the Rod Storage Organizer. Best gifts for men and women. There areDEAL gifts. 6 fishing rods are neatly and securely stored in the Rod Storage Organizer. Best gifts for men and women.
👤They are easy to put up. Will purchase more.
Black powder coated finished can provide maximum protection, prevent the fishing rods from corroding, used for years. Large hole diameter is 1.5" The rod rest is designed with deep grooves to allow it to rest peacefully in place. The distance between the two racks should be adjusted to accommodate your fishing rods length. The rod rack can be mounted on the wall or ceiling to hold fishing rods, ski poles, hiking poles, cue and hockey sticks. It's a great pole holder for your garage, shed, or other storage area. The ceiling fishing rod storage rack holder is made of heavy duty steel and is more sturdy. It can hold up to 8 rods and reel combo. Black powder coated finished can provide maximum protection, prevent the fishing rod from corroding, used for long time. It is easy to install the mounting hardware included. It is easy to install the mounting hardware included.
👤The butt end of the fishing rod and the female end of a two piece rod need to be accommodated by this item.
👤Heavy duty metal for storing fishing rods. works great!
👤I knew I wouldn't be able to get every rod next to each other. I had three sets of mounts for most of them. One more set should do the trick.
The rod rack can hold up to 6 rods. The foam grip pads hold rods securely. A lightweight plastic design. It is a long lasting proof of corrosion. 6 rods are neatly and securely stored.
👤Two people need to be hit. 1. The person decided which screws to include. The person agreed. The rack is great but the screws are terrible. They are flat head. Is it a flat head? Who uses flat heads now? There was a terrible decision. They're only about the same length. The mount point is thick. You know what it is? Hmm? You are correct. The screws don't reach the studs in the wall. Do you see the issue? Pulling out the rods from the brackets. How long do you think it will take for the rack to fall off the wall and the expensive rods to fall to the ground? Okay. Maybe it's not that hard. You know what I'm talking about. Not sure about you. I wouldn't trust these tiny screws in the wall to hold my rods and reels, they are 16" apart, and no drywall anchor is included. Most framed walls allow you to mount. The screws are long enough. rant over. The screws were replaced with 1-1/4" drywall screws. I'm not worried about the rods falling off the wall because they are now organized and off the ground. If anyone from Berkley is reading this. The wall mount rack is very good. Still. I mentioned those two people before.
👤It was perfect. What I was looking for. There is vertical support for 6 reeds. The plastic material has a good finish. I have used it for 4 spinning rods with their 3000 and 4000 reels. Pros. The material is resistant. It can be mounted for different lengths of rods. The base in the vertical kit has front support so it can be mounted horizontally and still hold the fishing rods. The upper support has high density foam. There are screws for wall mounting. There are Cons. The screws are good for wood, drilled brick or concrete, but not for plasterboard walls. SPANISH review perfecto. Justo, buscaba. Para 6 caas, soporte vertical. Material plastico de gran resistencia. He has a problema con 4 caas de spinning, 1 x 7'0'' medium light, 1 x 7'0'' medium heavy, and 2 x 8'0'' medium heavy. Pros. Material resistente. Puede para caas. En el kit horizontal, la base tiene soporte frontal. Espuma de alta densidad. Incluye tornillos para montar. There are Cons. Los tornillos estn para madera, ladrillo o cemento previamente taladrado.
👤These were easy to install and work well. I worry that the hard molded foam will not hold up over time, but I am careful as I put the rods in and out. The TWSS. It is easy to install and do the job. I don't have a picture of it in use, but I have a great picture of all my girls fishing, so you can see why I need to be able to store multiple fishing rods. There is a better picture.
👤I bought this because it was cheaper than the Rapala rod holders. It is cheaper in every sense of the word. The foam is hard to navigate. I ordered another Rapala rod holder and recommend you do the same, as the far right holder shows the foam missing where it fell out.
There are gift ideas. The magnetic tool is a great gift for men and women who want to expand their tool collection. It is ready to give to someone. The Innovative Patented Design of the fishing pole holder makes it easy to use and store up to 15 fishing rods or fishing rod and reel combo in less than 18” of wall space. Innovative. The KastKing V15 vertical fishing rod rack can hold up to 15 rods or combo in less than 18 inches of wall space. Most brands only have 6 combo in the same amount of space. Rods and combo can be mounted virtually anywhere along the length of the rod, allowing reels to be staggered at different heights for minimum storage space. The innovative design of the fishing pole rack is easy to use. Push the rod firmly into the large or small v-grooves until the grip material grabs it. The rod can be hung with the thread wrapped line guides above the v-groove. The reel can be attached to a 12” rod. To remove your combo from the fishing rod rack, grab the rod near the rod rack and pull out. The KastKing V15 fishing rod holder is made from a tough material which is resistant to heat, chemicals, and impact. The v-grooves are injected with a tacky thermoplastic material to make sure rods and combo are held securely in your rack. The V15 fishing pole rack has three mounting holes. Two holes are on the center of the wall. To install the rack, you need to determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, anchor for center mounting hole, re-level rod rack and tighten all screws. The V15 fishing rod rack will save space.
👤I have a small space and a high garage that make it hard to store my rods. I ordered the V15 and was able to put my rods in a secure area. The rubber stuff that the V have is strong. I'm definitely thinking of ordering another one.
👤I don't know why this is so good. It is a one piece rack that holds up rods. I put up a penn rod and reel combo and it slid down. If the rod guides were resting above the V, it would stay up.
👤The rod racks were taking up too much space in my garage and were getting in the way. There is a The KastKing 2 pack is 30 dollars. The rod holder gave me more space in my garage. The kit has instructions on how to install and mount to the wall. The design holds the rods in place.
👤I've purchased quite a few of the KastKing products. I needed something to organize the rods in the corner of my garage. The design is great and I liked how many rods were able to fit as other products similar to this usually only hold around 6. It was easy to install and I didn't need to use the two holes on the sides that were lined up with studs. Simply screw it in to the wall with the included hardware and you're done. I had an issue with the rods falling and landing on the floor as I put them into the slots. I had to push them harder into the rubber to hold them, but with more flexible rods, I was worried about them breaking. The design needs work, but I like the idea. If you put the rod to far away from the reel in the holder, it will not stay, it will be hard to get it to close to the reel. I have figured out how to get it to work. It takes a lot of time to move the mount. It works well once you patch the small holes.
👤I just bought my first couple nicer rods and needed to organize so the order arrived on time. It took me about a minute to grab my impact drill and sink the three screws provided in the wall, but I used one of the three drywall anchors included for middle whole. The side holes are 16 in each other and sunk into the wall. The rack is made of plastic and comes in a V shape and U shaped slots for thicker rods. This seems to be a product that is made to last and looks very sharp on the wall.
👤If you have spinning reels attached, you can fit more rods on there than they claim. There is a The rubbery material that holds the rods seems to be of decent quality. It has "memory", which means that with use the rubber gets permanent indentations where the rod is held in place. This started happening on my computer after a few months of use. I don't like that it takes a little force to get a rod out, and that it doesn't prevent the rod from falling if the rubber ever loses its grip. I think the rubber will lose its elasticity at some point, but I don't know how long.
No tools are required for assembly of the rack. The fishing story is unique. There are up to 6 rods in the fishing pole wall rack stores. A perfect rod holder for your garage, shed, and other storage areas. The 2-piece construction allows wall-mounting in either horizontal or vertical configuration. Allow this fishing pole holder to be used in different ways. Easy assembly. Assembly is easy and stress-free. Less time is spent on assembling and more time on the water. There are resting caps for switch between configurations. It's durable. The skip-peel finish has added scratch resistance. Treat your fishing equipment with care. The official rack size is 4L x 12W x 24H and is easy to assemble. Rush Creek Creations is dedicated to providing premium storage solutions for fishing and hunting gear. The sport is called billiards.
👤It was a Christmas gift for my husband. He has a variety of reels and rods at various prices. He is very picky about the gifts he receives. I assumed he would return it. He really likes the wood. The finish is glossy but not shiny. Installation was easy, but he is handy with most home projects. He put it in a cottage for his fishing equipment. The poles weren't staying in at the top. He attached a bungee cord to the two small nails at the end of the top piece and it worked out perfect. The price for a solid wood rod holder was reasonable, and it works well in the cottage. Would purchase again. The top piece is the reason for the 4 stars, but it is easy to fix.
👤It is one of the better looking fishing rod racks I have seen, but it is not the most practical without a little modification. I knew this was going to happen based on other reviews. The wood works. If you want to install it on something that isn't perfectly flat or wood could split, I would recommend fastening it to another board. I assumed that the top of the rack didn't hold the rod tips securely in place, but it's easy to make a small door out of small plates from Home Depot. It is definitely a form over function application. It looks better than most of the cheap plastic ones. There is a You know why you are getting into it with that glowing endorsement.
👤If you don't mind how it looks or the fact that you can't put them all up at the same time, read no further. I don't like it. My poles hang vertically because my ceilings are not tall enough. It is in the bedroom where nobody else can see it. I can't put the rods up evenly because they hit the reel below. You can offset them by hitting the pole with your reels. Pick your poison. It looks like a cluttered mess hanging them horizontally. The handle should have been opposite of the one below. The thing itself looks very nice.
👤I have never used screw anchors before. They are similar to a plastic dowel that you put in the wall. There is nothing to anchor it. They don't expand when you screw the screw into it. They threw them out and used real anchors. There is a flaw in the design. I mounted top and bottom but the poles wouldn't stay put. I took extra time to get them to lean to the right. They would stay put. There is nothing that can be done to prevent the pole from falling. The rod wants to go straight up and down, but if it doesn't do anything, it will fall out. It needs something to hold the pole. I thought about re-mounting the top and offsetting it a few inches from the bottom so the pole wouldn't lean to the right, but it just wasn't worth it.
Stores all types of fishing rods. The upper and lower rack is 23.62"L x 1.95"W x 9.65"H. 21.26"L x 3.15"W x 2.3"H Preserving your rods in the off-season or protecting them from damage is possible with the ZACX Rod Rack. The Rod & Reel Storage can hold up to 6 fishing rods or combo. A base grip that eliminates pressure on rod eyes and a foam grip that protects your rods from scratches are some of the benefits of a fishing rod holder. 6 mounting screws are included for easy setup of the horizontal rack for your boat or vehicle. The best fishing gift for men is the fishing gear rod storage.
👤Installation, delivery and open packaging are easy. Well packaged. I have all low-profile bait cast reels and even then, they're a tight fit.
👤It must have for all lengths and sizes. We love it on my ceiling.
👤It works like it should.
👤It fits all of my rods.
👤It was installed yesterday. The design is easy to install. The space is being saved. The rod tips are firmly held. Very good choice of fishing rods.
Fishing rod holders for garage horizontal products from Rack'em. In this article about fishing rod holders for garage horizontal you can see why people choose the product. Butizone and Sratte are also good brands to look for when you are finding fishing rod holders for garage horizontal.
Rack'em, Butizone and Sratte are some of the best brands that chosen by people for fishing rod holders for garage horizontal. Find the detail in this article. Denpetec, Pactrade Marine and Silanon are also brands that their products are worth to check.